Optimization and a new constitutive equation for RC beam strengthened by FRP

被引：0

作者：

Taghia S.A.H.S. ^{[1
]}

Darvishvand H.R. ^{[2
]}

Maleki M. ^{[2
]}

机构：

[1] Department of Civil and Environmental Engineering, University of Hawaii at Manoa, Honolulu

[2] Department of Civil Engineering, Qazvin Branch, Islamic Azad University, Qazvin

来源：

Asian Journal of Civil Engineering | 2024年 / 25卷 / 5期

关键词：

Debonding stress; Flexural strengthening; GFRP; Mechanical and seismic properties; Proposed model;

D O I：

10.1007/s42107-024-01042-8

中图分类号：

学科分类号：

摘要：

The use of FRP has been developed for flexural strengthening of reinforced concrete (RC) beams in recent years due to its advantages, such as ease of implementation, a slight change in cross-sectional dimensions, corrosion resistance, and increase in bearing capacity of the beam. Therefore, paying attention to technical considerations in applying FRP is crucial. This study intends to address two specific concerns. The first one is to determine the effect of the number of FRP layers on the improvement of mechanical and seismic properties in the flexural strengthening of RC beam and to specify the necessary numbers of FRP layers. The other consideration is to propose a new equation for FRP debonding stress and explain the behavior of FRP in tension after the occurrence of debonding failure. In this regard, reinforced concrete samples were prepared with zero, one, three, and five layers of GFRP, and then, four-point tests were performed on the samples. The results indicated an optimal number of GFRP layers that led to maximum mechanical and seismic properties in the flexural strengthening of beams. This study showed that the proposed model could not only estimate the debonding stress but also describe the behavior of GFRP after the debonding. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2024.

引用

页码：4211 / 4224

页数：13

共 33 条

[1]

Achintha M., Burgoyne C., Fracture energy of the concrete-FRP interface in strengthened beams, Engineering Fracture Mechanics, 110, pp. 38-51, (2013)

[2]

Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R–17, (2017)

[3]

Aljazaeri Z.R., Al-Jaberi Z., Numerical study on flexural behavior of concrete beams strengthened with fiber reinforced cementitious matrix considering different concrete compressive strength and steel reinforcement ratio, International Journal of Engineering, Transactions a: Basics, 34, 4, pp. 796-802, (2021)

[4]

Aram M.R., Czaderski C., Motavalli M., Debonding failure modes of flexural FRP-strengthened RC beams, Composites, Part b: Engineering, 39, pp. 826-841, (2008)

[5]

Seismic Rehabilitation of Existing Buildings, (2006)

[6]

Seismic Evaluation and Retrofit of Existing Buildings, (2013)

[7]

Standard Specification for Portland Cement, (2007)

[8]

Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, (2018)

[9]

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), (2022)

[10]

Bilotta A., Faella C., Martinelli E., Nigro E., Design by testing procedure for intermediate debonding in EBR FRP strengthened RC beams, Engineering Structures, 46, pp. 147-154, (2013)

← 1 2 3 4 →