A gear fault diagnosis method based on deep belief network and information fusion

被引：0

作者：

Li Y. ^{[1
,2
]}

Huang D. ^{[1
]}

Ma J. ^{[1
]}

Jiang L. ^{[1
,2
]}

机构：

[1] School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan

[2] Hubei Digital Manufacturing Key Laboratory, Wuhan

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2021年 / 40卷 / 08期

关键词：

Deep belief network(DBN); Fault diagnosis; Gear; Improved shuffled frog leaping algorithm(ISFLA); Multi-sensor information fusion;

D O I：

10.13465/j.cnki.jvs.2021.08.008

中图分类号：

学科分类号：

摘要：

It is difficult to extract the fault features of gears under complex operation conditions. The traditional fault diagnosis and recognition accuracy are easily affected by the manual feature extraction, and the information obtained by a single sensor is not comprehensive. To solve the above problems, a gear fault diagnosis method based on deep belief networks (DBN) and information fusion was proposed in this paper. Firstly, the vibration signals collected by each sensor were fused by multi-sensor information fusion technology at the data layer, and then DBN was used for adaptive feature extraction to achieve fault classification. In order to avoid the problem of model recognition accuracy degradation caused by artificial selection of DBN structural parameters, an improved shuffled frog leaping algorithm (ISFLA) was proposed to optimize DBN structural parameters. Experiments show that the information fusion and optimization methods proposed in this paper have higher fault recognition accuracy than BP neural network, DBN, and single sensor fault diagnosis. © 2021, Editorial Office of Journal of Vibration and Shock. All right reserved.

引用

页码：62 / 69

页数：7

共 19 条

[1]

WEI Sha, HAN Qinkai, CHU Fulei, Review on research of uncertain dynamics for gear system, Journal of Mechanical Engineering, 52, 1, pp. 1-19, (2016)

[2]

HU Niaoqing, CHEN Huipeng, CHENG Zhe, Et al., Fault diagnosis for planetary gearbox based on EMD and deep convolutional neural networks, Journal of Mechanical Engineering, 55, 7, pp. 9-18, (2019)

[3]

XIN Yu, LI Shunming, WANG Jinrui, Et al., Gear fault diagnosis method based on iterative empirical wavelet transform, Chinese Journal of Scientific Instrument, 39, 11, pp. 79-86, (2018)

[4]

HINTON G E, OSINDERO S, TEH Y W., A fast learning algorithm for deep belief nets, Neural Computation, 18, 7, pp. 1527-1554, (2006)

[5]

YAN J H, HU Y Y, GUO C Z., Rotor unbalance fault diagnosis using DBN based on multi-source heterogeneous information fusion, Procedia Manufacturing, 35, pp. 1184-1189, (2019)

[6]

XU F, FANG Y J, WANG D, Et al., Combining DBN and FCM for fault diagnosis of roller element bearings without using data labels, Shock and Vibration, 2018, pp. 1-12, (2018)

[7]

ZHANG T F, LI Z, DENG Z H, Et al., Hybrid data fusion DBN for intelligent fault diagnosis of vehicle reducers, Sensors, 19, 11, pp. 1-23, (2019)

[8]

CHEN Baojia, LIU Haotao, XU Chao, Et al., Gear fault diagnosis on DBNS, China Mechanical Engineering, 30, 2, pp. 205-211, (2019)

[9]

ZHENG Xiaoxia, CHEN Guangning, REN Haohan, Et al., Fault detection of vulnerable units of wind turbine based on improved VMD and DBN, Journal of Vibration and Shock, 38, 8, pp. 153-160, (2019)

[10]

SHAO H, JIANG H, ZHANG X, Et al., Rolling bearing fault diagnosis using an optimization deep belief network, Measurement Science and Technology, 26, 11, pp. 1-17, (2015)

← 1 2 →