Effect of heat treatment and particle size on the crystalline properties of wood cellulose

被引：6

作者：

Kim A.-R. ^{[1
]}

Kim N.-H. ^{[1
]}

机构：

[1] Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon

来源：

Journal of the Korean Wood Science and Technology | 2019年 / 47卷 / 03期

基金：

新加坡国家研究基金会;

关键词：

Heat-treatment; Particle size; Paulownia tomentosa; Relative crystallinity; Wood flours;

D O I：

10.5658/WOOD.2019.47.3.299

中图分类号：

学科分类号：

摘要：

This study was carried out to investigate the effect of heat-treatment and particle size on the crystalline properties of the wood cellulose. The color of wood flours was changed from light yellow in control sample to dark yellow or deep brown by heat treatment at 100℃ to 200℃. Relative crystallinity of the heat treated wood cellulose decreased with decreasing particle size from wood chips to 200 mesh, and there was little change in the crystal width. As the temperature was increased, relative crystallinity of the wood increased and crystal width was not changed. As a result of the FT-IR analysis, it was confirmed that the peaks were gradually decreased at –OH elongation as the heat-treated temperature was increased. The lignin C-H bending of 1425 cm-1 and the hemicellulose C-H bending of 1370 cm-1 did not change with the increase of the heat treatment temperature. In addition, it was revealed that C-C stretching of carbohydrate near 1031 cm-1 decreased with increasing heat treatment temperature. Consequently, it is suggested that particle size and heat treatment affected the crystalline properties of wood cellulose. © 2019, Korean Society of Wood Science Technology. All rights reserved.

引用

页码：299 / 310

页数：11

共 40 条

[1]

Akgul M., Gumuskaya E., Korkut S., Crystalline structure of heat-treated Scots pine [Pinus sylvestris L.] and Uludağ fir [Abies nordmanniana (Stev.) subsp. bornmuelleriana (Mattf.)] wood, Wood Science and Technology, 41, 3, (2007)

[2]

Bhuiyan M.T.R., Hirai N., Sobue N., Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions, Journal of Wood Science, 46, 6, pp. 431-436, (2000)

[3]

Boonstra M.J., van Acker J., Kegel E., Stevens M., Optimisation of a two-stage heat treatment process: Durability aspects, Wood Science and Technology, 41, 1, pp. 31-57, (2007)

[4]

Bodirlau R., Teaca C.A., Fourier transform infrared spectroscopy and thermal analysis of lignocellulose fillers treated with organic anhydrides, Romanian Journal of Physics, 54, 1-2, pp. 93-104, (2009)

[5]

Chung H., Han Y., Park J.H., Chang Y.S., Park Y., Yang S.Y., Yeo H., A Study on Dimensional Stability and Thermal Performance of Superheated Steam Treated and Thermal Compressed Wood, Journal of the Korean Wood Science and Technology, 44, 2, pp. 184-190, (2016)

[6]

Cermak P., Dejmal A., The effect of heat and ammonia treatment on colour response of oak wood (Quercus robur) and comparison of some physical and mechanical properties, Maderas. Ciencia Y tecnología, 15, 3, pp. 375-389, (2013)

[7]

Dai D., Fan M., Investigation of the dislocation of natural fibres by Fourier-transform infrared spectroscopy, Vibrational Spectroscopy, 55, 2, pp. 300-306, (2011)

[8]

Esteves B., Pereira H., Wood modification by heat treatment: A review, Bioresources, 4, 1, pp. 370-404, (2008)

[9]

Feher S., Koman S., Borcsok Z., Robert T., Modification of hardwood veneers by heat treatment for enhanced colors, Bioresources, 9, 2, pp. 3456-3465, (2014)

[10]

Garrote G., Dominguez H., Parajo J.C., Hydrothermal processing of lignocellulosic materials, European Journal of Wood and Wood Products, 57, 3, pp. 191-202, (1999)

← 1 2 3 4 →