MASTER ERROR ELIMINATION IN FORCED GEAR ENGAGEMENT TESTING MACHINE USING HARMONIC ANALYSIS THROUGH FAST FOURIER TRANSFORM

被引：0
作者：
Stanciu D.-I. [1 ]
Gheorghe G.I. [2 ]
Cioboată D.-D. [1 ]
机构：
[1] National Institute of Research and Development for Mechatronics and Measurement Technique, INCDMTM, Bucharest
来源：
International Journal of Mechatronics and Applied Mechanics | 2021年 / 2卷 / 10期
关键词：
Forced Gear Engagement; Fourier Transform; Harmonical Analysis; Master Error Elimination; Novel Method for Gear Checking; Testing Machine;
D O I：
10.17683/IJOMAM/ISSUE10/V2.27
中图分类号：
学科分类号：
摘要：
The growth in the capacity of production of gears and the higher industrial gear quality requirements call for the use of fast and accurate methods of checking gears right in the manufacturing flows. This paper presents a method of rapid and accurate verification of gears by applying the Fourier Transform analysis method to the variation of the distance between the shafts of two gears meshed together in a forced engagement. The paper also presents a method of replacing standard gears-used on test units featuring a tooth fitted between the standard gear and the measuring gear-with a regular gear, while maintaining the same level of accuracy of the measurement. © 2021, Cefin Publishing House. All rights reserved.
引用
收藏
页码：238 / 247
页数：9
相关论文
共 9 条
  • [1] Sirbu Nicolae, Cercetări privind solicitările din carcasa cutiei de viteze sumatoare în vederea reducerii zgomotului și îmbunătățirea soluției constructive, (2014)
  • [2] Banica M., Optimizarea dinamicii angrenajelor, (2006)
  • [3] Prosig Noise and Vibration Measurement Handbook, Sixt Edition" – Handbook
  • [4] Brandt Anders, Noise and Vibration Analysis: Signal Analysis and Experimental Procedures, (2011)
  • [5] Gheorghe Gheorghe Ion, Bajenaru Valentina, Ilie Iulian, Ingineria Mecatronică și Cyber-MixMecatronică pentru Construcția Intreprinderii Digitale și Industriei Inteligente (4.0), (2019)
  • [6] Radu O., Sandulescu GH., Filtre Numerice – Aplicații, (1979)
  • [7] Cylindrical Gears-Code of inspections practice-Part 1: Inspection of corresponding flanks of gear teeth, (1992)
  • [8] Cylindrical Gears-Code of inspections practice-Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash, (1996)
  • [9] Cylindrical Gears-Code of inspections practice-Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of shafts, (1996)
1