Temperature field in the central area of CFRP induction heating coil

被引：0

作者：

Fu T. ^{[1
]}

Xu J. ^{[2
]}

Zhao H. ^{[2
]}

Liu M. ^{[2
]}

机构：

[1] School of Mechanical Engineering, Harbin University of Science and Technology, Harbin

[2] School of Automation, Harbin University of Science and Technology, Harbin

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2021年 / 38卷 / 10期

关键词：

Carbon fiber; Composite material; Induction heating; Plain weave; Temperature field;

D O I：

10.13801/j.cnki.fhclxb.20201216.001

中图分类号：

学科分类号：

摘要：

Induction heating technology is an effective method to achieve low energy consumption and efficient curing and molding of carbon fiber reinforced polymer (CFRP). Improving the uniformity of the CFRP induction heating temperature field is the key to ensure the molding quality. And the uniformity of the temperature field in the left of the coil is to ensure the overall temperature uniformity of the material key. According to the principle of electromagnetic heating, an analysis model of CFRP finite element multi-field coupling was established. The comparison and analysis of the temperature field heating and distribution of the simulation calculation and the experimental process proves that the simulation can accurately simulate the temperature field distribution of CFRP induction heating. According to the entropy theory of the image, the uniformity of the temperature field is expressed by the size of the entropy, and the quantitative analysis of the uniformity of the CFRP induction heating temperature field is realized. The coil diameter and the distance between the coil and the material are calculated and studied through the finite element model. The influence of the uniformity of the temperature field, the relationship curve between the uniformity of the temperature field in the left area and the coil diameter and material spacing is obtained, which provides a theoretical basis for the selection of coil diameter and material spacing for the combined coil to uniformly heat CFRP. © 2021, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

引用

页码：3314 / 3322

页数：8

共 24 条

[1]

BAYERL T, DUHOVIC M, MITSCHANG P, Et al., The heating of polymer composites by electromagnetic induction-A review, Composites Part A: Applied Science and Manufacturing, 57, pp. 27-40, (2014)

[2]

SCHIELER O, BEIER U, MITSCHANG P., Control of the through thickness temperature distribution in carbon composite aerospace parts during induction welding, Journal of Thermoplastic Composite Materials, 31, 12, pp. 1587-1608, (2017)

[3]

CAO Weiyu, YANG Xueping, ZHANG Ousheng, Development and prospect of high performance polymer compo-sites in China, Strategic Study of CAE, 22, 5, pp. 112-120, (2020)

[4]

XING Liying, FENG Zhihai, BAO Jianwen, Et al., Facing opportunity and challenge of carbon fiber and polymer matrix composites industry development, Acta Materiae Compositae Sinica, 37, 11, pp. 2700-2706, (2020)

[5]

BAO Jianwen, JIANG Shicai, ZHANG Daijun, Current status and trends of aeronautical resin matrix composites reinforced by carbon fiber, Science & Technology Review, 36, 19, pp. 52-63, (2018)

[6]

ABLIZ D, YUGANG D., Curing methods for advanced polymer composites-A review, Polymers & Polymer Composites, 21, 6, pp. 101-106, (2013)

[7]

SUN X F, MA S N, LIU H W., Research on properties of carbon fiber/epoxy resin composite material by microwave curing, Rare Metal Materials and Engineering, 41, pp. 422-424, (2012)

[8]

LIU Yi, ZHU Guangming, Development of curing process for fiber-reinforced resin matrix composites, China Plastics, 32, 6, pp. 1-9, (2018)

[9]

RICCIO A, RUSSO A, RAIMONDO A, Et al., A numerical/ experimental study on the induction heating of adhesives for composite materials bonding, Materials Today Communications, 15, pp. 203-213, (2018)

[10]

SERGEANT P L, DUPRE L R, DEWULF M., Optimizing active and passive magnetic shields in induction heating by a genetic algorithm, IEEE Transactions on Magnetics, 39, 6, pp. 3486-3496, (2003)

← 1 2 3 →