Physical properties and environmental performance of steam-cured concrete containing flue-gas desulfurization gypsum

被引：0

作者：

Jang H. ^{[1
]}

So S. ^{[2
]}

机构：

[1] Joenbuk National University, Department of Architectural Engineering

[2] Joenbuk National University, Department of Architectural Engineering, Research Center of Industrial Technology

来源：

Journal of Green Building | 2021年 / 16卷 / 01期

基金：

新加坡国家研究基金会;

关键词：

FGD gypsum; Leaching toxicity; Nanopores; Recycled material;

D O I：

10.3992/JGB.16.1.3

中图分类号：

学科分类号：

摘要：

Flue-gas desulfurization (FGD) gypsum has occasionally been used as an additive to cement. Consequently, appropriate facilities are required to ensure the environmentally safe processing of FGD gypsum and the resulting cement material properties. Such facilities are yet to be developed because the amount of FGD gypsum used is still small when compared with the vast amounts of FGD gypsum generated. In this study, we analyze the effect of FGD gypsum addition on the physical properties, stabilization, and radon count of steam-cured mortar and compare its performance with air-cured mortar. Our results show that the steam-cured pozzolanic hydration products of ettringite and C-S-H promote the densification of the mortar structure, thereby resulting in nanopore size reduction and increased strength of FGD gypsum mortar subsequent to the steam-cured hydration process. Further, our environmental test results indicate that steam-cured pozzolanic materials composed of FGD gypsum are environmentally safer than air-cured cementitious materials. © 2021, College Publishing. All rights reserved.

引用

页码：3 / 15

页数：12

共 35 条

[1]

Accelerated curing of concrete at atmospheric pressure-state of the art, ACI manual of concrete practice part 5: masonry, precast concrete, special processes, (1992)

[2]

Baoju L., Youjun X., Shiqiong Z., Jian L., Some factors affecting early compressive strength of steam-curing concrete with ultrafine fly ash, Cement and Concrete Research, 31, pp. 1455-1458, (2001)

[3]

Berry E. E., Hemmings R. T., Cornelius B. J., Mechanisms of hydration reactions in high volume fly ash pastes and mortars, Cement and Concrete Composite, 12, pp. 253-261, (1990)

[4]

Buecker B., Blaine R., Thermogravimetry: A great tool for flue gas desulfurization solids analysis, TA318 Instruments, pp. 1-6, (2004)

[5]

Campos M. P., Costa L. J. P., Nisti M. B., Mazzilli B. P., Phosphogypsum recycling in the building materials industry: assessment of the radon exhalation rate, Journal of Environmental Radioactivity, 172, pp. 232-236, (2017)

[6]

Carbonell-Barrachina A., DeLaune R. D., Jugsujinda A., Phosphogypsum chemistry under highly anoxic conditions, Waste Manage, 22, 6, pp. 657-665, (2002)

[7]

Chen Z. W., Wu S. P., Li F. Z., Chen J. Y., Qin Z. H., Pang L., Recycling of flue gas desulfurization residues in gneiss based hot mix asphalt: Materials characterization and performances evaluation, Construction and Building Materials, 73, pp. 137-144, (2014)

[8]

Clark R. B., Ritchey K. D., Baligar V. C., Benefits and constraints for use of FGD products on agri-cultural land, Fuel, 80, 6, pp. 821-828, (2001)

[9]

Council Directive 88/609/EEC of 24 November 1988 on the limitation of emissions of certain pollutants into the air from large combustion plants

[10]

Council Directive 94/66/EC of 15 December 1994 amending Directive 88/609/EEC on the limitation of emissions of certain pollutants into the air from large combustion plants

← 1 2 3 4 →