Impact of tool offset and friction stir welding speed on interface morphology of a dissimilar T-lap joints

被引：0

作者：

Quach, Nam Hoai ^{[1
]}

Duong, Hao Dinh ^{[1
]}

Tran, Tra Hung ^{[1
]}

机构：

[1] Nha Trang Univ, Dept Engn Mech, Nha Trang City, Vietnam

来源：

WELDING INTERNATIONAL | 2022年 / 36卷 / 07期

关键词：

Friction stir welding; T-lap joint; interface morphology; tool offset; IMPROVEMENT;

D O I：

10.1080/09507116.2022.2063094

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The dissimilar aluminum alloys of 5083 and 6061 were friction stir welded via T-lap configuration. The impact of the tool offsets and the tool moving velocity on the interface geometry and the bonding strength of the joints was investigated. The experimental results showed that the interface morphology was sensitive to both the tool offsets and welding rates. The hook defects were easily formed at low welding rate of 150 mm/min. The kissing bonds were ineliminable by both the tool offset and the tool speed. The joint strength was improved due to the offsetting pin tool toward both the retreating side and advancing side with a distance of 0.3 mm. The effect of the tool offset on the joint tensile strength was more remarkable than that of welding rate. The interface formation and fracture behavior of the joints were also revealed to clarify these findings.

引用

页码：379 / 386

页数：8

共 50 条

[21] Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation
G. Buffa
M. De Lisi
E. Sciortino
L. Fratini
Advances in Manufacturing, 2016, 4 : 287 - 295
[22] Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation
Buffa, G.
De Lisi, M.
Sciortino, E.
Fratini, L.
ADVANCES IN MANUFACTURING, 2016, 4 (04) : 287 - 295
[23] On the critical technological issues of friction stir welding lap joints of dissimilar aluminum alloys
Velotti, C.
Astarita, A.
Squillace, A.
Ciliberto, S.
Villano, M. G.
Giuliani, M.
Prisco, U.
Montuori, M.
Giorleo, G.
Bellucci, F.
SURFACE AND INTERFACE ANALYSIS, 2013, 45 (10) : 1643 - 1648
[24] Friction Stir Welding of T Joints of Dissimilar Aluminum Alloy: A Review
Thakare, Shrikant B.
Kalyankar, Vivek D.
ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE, 2018, 1943
[25] FRICTION STIR WELDING OF T-JOINTS IN DISSIMILAR ALUMINIUM ALLOYS
Tavares, S. M. O.
Azevedo, P. C. M.
Emilio, B.
Richter-Trummer, V.
Figueiredo, M. A. V.
Vilaca, P.
de Castro, P. M. S. T.
IMECE2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 4: DESIGN AND MANUFACTURING, 2009, : 265 - 273
[26] Microstructural Evolution and Hardness of Dissimilar Lap Joints of ODS/Stainless Steel by Friction Stir Welding
Chen, Chun-Liang
Richter, Asta
Wu, Lung-Tien
Dong, You-Ming
MATERIALS TRANSACTIONS, 2013, 54 (02) : 215 - 221
[27] Dissimilar material lap joints by Friction Stir Welding of Steel and Titanium Sheets: Process Modeling
Buffa, Gianluca
Ducato, Antonino
Fratini, Livan
11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES (NUMIFORM 2013), 2013, 1532 : 491 - 498
[28] Friction stir welding of T-joints in dissimilar materials: Influence of tool geometry and materials properties
Manuel, Neves
Silva, Claudio
Domingos da Costa, Jose Moreira
Loureiro, Altino
MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
[29] Impact of friction stir welding tool profile on the strength of dissimilar aluminium and stainless steel welded joints
Florence, Prasuna Lilly
Narayanaswamy, K. S.
Sai, P. H. V. Sesha Talpa
Devaraj, S.
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 583 - 585
[30] Tailoring of Dissimilar Friction Stir Lap Welding of Aluminum and Titanium
Kalinenko, Alexander
Dolzhenko, Pavel
Borisova, Yulia
Malopheyev, Sergey
Mironov, Sergey
Kaibyshev, Rustam
MATERIALS, 2022, 15 (23)

← 1 2 3 4 5 →