Melting by Reflected Laser Beam during Vertical Welding via Hot-Wire Laser Welding

被引：0
作者：
Charunetratsamee S. [1 ]
Warinsiriruk E. [2 ]
Kenji S. [3 ]
Motomichi Y. [1 ]
机构：
[1] Graduate School of Engineering, Hiroshima University
[2] National Institute of Technology, Kure College
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 2019年 / 37卷 / 04期
基金：
日本学术振兴会;
关键词：
Diode laser; Hot-wire; Laser welding; Laser-weaving condition; Reflected laser beam;
D O I：
10.2207/qjjws.37.208
中图分类号：
学科分类号：
摘要：
We investigated the melting of a base metal, molten pool growth, and joint creation during vertical welding via hot-wire-laser welding. Three laser-weaving conditions were investigated by changing the weaving frequency and waveform to study the effects of the irradiation duration near the groove surface. In addition, high-speed and cross-sectional imaging were performed to investigate the heating and melting processes on the groove surface during hot-wire laser welding. The irradiation duration near the groove surface in a cycle had a marked effect on the melting of the groove surface. The combination of a 5 Hz laser frequency with an exponential waveform led to a longer duration near the groove surface during a cycle and realized improved fusion compared with the other combinations with a 15 Hz laser frequency and a sine waveform. The laser beam reflected from the molten pool surface was the main source of heat for melting the groove surface. Hot-wire feeding provided a continuous and efficient supply of melted material and a stable heat input on the groove surface via the reflected laser beam. © 2019 Japan Welding Society. All rights reserved.
引用
收藏
页码：208 / 214
页数：6
相关论文
共 19 条
  • [11] Sasaki K., Suda K., Motomatsu R., Hashiba Y., Okita S., Imai S., Development of two-electrode electro-gas arc welding process, Nippon Steel Technical Report, 380, pp. 57-63, (2004)
  • [12] Funatsu Y., Otani J., Hirota K., Matsumoto T., Yajima H., Development of higher toughness yp47 (460 n/mm2) class steel plate for large container ships, Proc, pp. 102-106, (2010)
  • [13] Koichi N., Kazykuni H., Taiki E., Development of shipbuilding steel plate with superior low temperature toughness for large heat input welding, JFE Technical Report, 20, pp. 8-13, (2015)
  • [14] Yamamoto M., Shinozaki K., Kadoi K., Fujita D., Inoue T., Fukahori M., Kitahara Y., Development of hot-wire laser weldingmethod for lap joint of steel sheet with wide gap, Quarterly J. JWS, pp. 58-61, (2011)
  • [15] Kadoi K., Shinozaki K., Yamamoto M., Owaki K., Inose K., Takayanagi D., Development of high-efficiency and high-quality hotwire laser fillet welding process, Quarterly J. JWS, pp. 62-65, (2011)
  • [16] Phaonaim R., Shinozaki K., Yamamoto M., Kadoi K., Tsuchiya S., Nishijima A., Development of a highly efficient hot-wire laser hybrid process for narrow-gap welding-Welding phenomena and their adequate conditions, Welding in the World, 57, pp. 607-613, (2013)
  • [17] Warinsirirruk E., Hashida K., Yamamoto M., Shinozaki K., Kadoi K., Tanino T., Yajima H., Fuki T., Nakayama S., Nose T., Tsuchiya S., Watanabe H., Kanazawa T., Welding phenomena during vertical welding on thick steel plate using hot-wire laser welding method, quarterly j, JWS, pp. 143-147, (2015)
  • [18] Warinsirirruk E., Hashida K., Yamamoto M., Shinozaki K., Kadoi K., Yajima H., Tanino T., Fuki T., Nakayama S., Tsuchiya S., Watanabe H., Kanazawa T., Oblique laser irradiation technique for vertical welding of thick steel plates employing hot-wire laser welding, quarterly j., JWS, pp. 326-331, (2015)
  • [19] Charunetratsamee S., Warinsirirruk E., Shinozaki K., Yamamoto M., Optimization of laser-irradiating conditions for vertical welding on thick steel plate using hot-wire laser-welding method, quarterly [j], JWS, pp. 187-192, (2019)
12