An empirical formula for peak shear strength of irregular sandstone joints under seepage flow

被引：0
作者：
Cheng T. [1 ]
Guo B. [1 ,2 ,3 ]
Sun J. [1 ]
Tian S. [1 ]
Chen Y. [1 ]
机构：
[1] School of Energy Science and Engineering, Henan Polytechnic University, Henan, Jiaozuo
[2] The Collaborative Innovation Center of Coal Safety Production of Henan Province, Henan Polytechnic University, Henan, Jiaozuo
[3] Jiaozuo Engineering Research Center of Road Traffic and Transportation, Henan Polytechnic University, Henan, Jiaozuo
来源：
Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering | 2022年 / 41卷 / SUPPLEMENT 2期
基金：
中国国家自然科学基金;
关键词：
empirical formula; joints; peak shear strength; rock mechanics; seepage pressure; shear-seepage;
D O I：
10.13722/j.cnki.jrme.2021.0890
中图分类号：
学科分类号：
摘要：
To study the effect of seepage on shear mechanical properties of rock joints，direct shear tests on 10 irregular sandstone joints in non-seepage natural state and 25 irregular sandstone joints in seepage state were carried out using the rock joint shear-seepage test device which is modified by RDS–200 rock direct shear apparatus. The influences of seepage pressure，normal stress and joint roughness on the shear mechanical properties of rock joints are analyzed，and the empirical formula for the peak shear strength of irregular sandstone joints under seepage is proposed. The results show that compared with the natural state without seepage，the peak shear strength of rock joints decreases，the peak shear displacement increases，and the pre-peak shear stiffness decreases in seepage state. Based on the empirical formula of peak shear strength of rock joints proposed by Barton，considering the effective stress principle and the influence of seepage water pressure on the basic friction angle together，the empirical formula of peak shear strength of irregular sandstone joints under seepage condition is proposed. Only two test parameters which can be easily to obtain(rock joint wall strength JCS and seepage water pressure) are added in the formula，and it has a good fitting effect on the test data of rock joint shear strength under seepage condition，which is helpful to accurately estimate the peak shear strength of rock joint under seepage condition. © 2022 Academia Sinica. All rights reserved.
引用
收藏
页码：3141 / 3151
页数：10
相关论文
共 26 条
  • [1] XIA Caichu, YU Qiangfeng, QIAN Xin, Et al., Experimental study of shear-seepage behaviour of rock joints under constant normal stiffness[J], Rock and Soil Mechanics, 41, 1, pp. 57-77, (2020)
  • [2] YIN Liming, CHEN Juntao, Experimental study of influence of seepage pressure on joint stress-seepage coupling characteristics[J], Rock and Soil Mechanics, 34, 9, pp. 2563-2568, (2013)
  • [3] LOMIZE G M., Flow in fractured rocks[M], (1951)
  • [4] LOUIS C., Introduction à l'hydraulique des roches[M], Bulletin Bureau de Recherches Geologiques et ´Minieres, III-4, pp. 283-356, (1974)
  • [5] BARTON N, BANDIS S, BAKHTAR K., Strength，deformation and conductivity coupling of rock joints[J], International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts, 22, 3, pp. 121-140, (1985)
  • [6] XU Guangxiang, ZHANG Yongxing, HA Qiuling, Super-cubic and sub-cubic law of rough fracture seepage and its experiments study[J], Journal of Hydraulic Engineering, 3, pp. 74-79, (2003)
  • [7] LIU Jie, YU Zhenmin, WANG Ruihong, Et al., Study on seepage law under the influence of multi-factor of sandstone fracturing[J], Journal of Hydraulic Engineering, 47, 1, pp. 54-63, (2016)
  • [8] GUO Baohua, Tan CHENG, CHEN Yan, Et al., Seepage characteristic of marble fracture and effect of filling sands[J], Journal of Hydraulic Engineering, 50, 4, pp. 59-70, (2019)
  • [9] OLSSON R, BARTON N., An improved model for hydromechanical coupling during shearing of rock joints[J], International Journal of Rock Mechanics and Mining Sciences, 38, 3, pp. 317-329, (2001)
  • [10] ESAKI T, MITANI Y，, Et al., Development of a shear-flow test apparatus and determination of coupled properties for a single rock joint[J], International Journal of Rock Mechanics and Mining Sciences, 36, 5, pp. 641-650, (1999)
123