Mechanical and thermal properties of pulp fiber/polylactic acid composite

被引：0

作者：

She Y. ^{[1
]}

Fu Y. ^{[2
]}

Zhu Q. ^{[1
]}

Wu S. ^{[3
]}

Xu X. ^{[1
]}

机构：

[1] College of Materials Science and Engineering, Nanjing Forestry University, Nanjing

[2] State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai

[3] College of Furnishings Design and Industry Design, Nanjing Forestry University, Nanjing

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2022年 / 39卷 / 10期

关键词：

Biocomposite; Bleached pulp fiber; Internal mixing; Polylactic acid (PLA); Two-screw extrusion;

D O I：

10.13801/j.cnki.fhclxb.20211115.005

中图分类号：

学科分类号：

摘要：

Biomass-derived fillers reinforced composites have always been considered as potential substitutes for petroleum-based products. In this work, high content of bleached pulp fibers (10wt% to 50wt%) were adopted to modify polylactic acid (PLA) with maleic anhydride grafted polypropylene (MA-g-PP) as the compatibilizer. Two pre-melting processes of fiber/PLA composites were tried, i.e., roll-grinding plus extruding as well as internal mixing process. Tensile test, SEM, FTIR、DMA and TGA were employed to comprehensively investigate the effects of processing methods and fiber content on the mechanical and thermal properties, and microstructure of fiber/PLA composites. The results showed that, internal mixing process (IM process) is more effective than grinding and extruding process (GE process) to achieve good dispersion and almost oriented-arrangement of the fibers in the matrix. IM-processed composites with fiber content up to 50wt% acquired the maximum tensile strength (50.49 MPa, slightly higher than PLA) and Young's modulus (2.56 GPa, 45.8% higher than PLA). Damping capacity and loss factor of composites are reduced by the rigid filled pulp fibers, while the peak temperature is positively migrated. Pulp fibers added have no adversely effect on thermal stability and improve the residues content of PLA composites. It can be concluded that bleached pulp fiber is an effective filler for PLA-based composites. © 2022, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

引用

页码：4856 / 4867

页数：11

共 37 条

[1] JIA Hongbing, SONG Ye, WANG Jingyi, Polymer materials, pp. 5-10, (2019)
[2] WEI Zechang, CAI Chenyang, WANG Xing, Et al., Research progress of biode gradable polymer toughened polylactic acid, Journal of Materials Engineering, 47, 5, pp. 34-42, (2019)
[3] CHEN Ming, Preparation of PLA/PCL blends by three-screw extruder and its performance research, pp. 1-10, (2020)
[4] HUANG Xiaolan, LI Cailing, LIU Xingqi, Et al., Research progress on modification and application of green degradable biopolymer polylactic acid, Engineering Plastics Application, 49, 7, pp. 162-166, (2021)
[5] DING Shijuan, ZHU Xishi, CHEN Huirong, Et al., Research progress on preparation and molding of biomass straw/polylactic acid materials, Green Packaging, 2021, 6, pp. 38-42
[6] SUN Dongbao, LU Qin, LU Xinyu, Et al., Study on the interface modification methods and properties of PLA/rice husk powder composites, China Plastics, 35, 6, pp. 80-84, (2021)
[7] WANG Xuan, Nano-cellulose modified polylactic acid composite material and its compatibilization mechanism, pp. 7-17, (2016)
[8] LIU Hua, LUO Binghong, CHEN Ruipeng, Et al., Preparation and characterization of nano-cellulose whisker reinforced and toughened poly(L-lactic acid) composites, Acta Materiae Compositae Sinica, 32, 6, pp. 1703-1713, (2015)
[9] YING Zeren, Structure and properties of polylactic acid/cellulose nanofiber composites, pp. 15-18, (2019)
[10] TEIJO R, HEIDI P, DAVID S Q., Foamability and viscosity behavior of extrusion foamed PLA-pulp fiber biocomposites, Journal of Applied Polymer Science, 136, 41, (2019)

← 1 2 3 4 →