Study on shear bearing capacity of cold-formed steel composite walls with lightweight gypsum fillings

被引:0
作者
Wu H.-H. [1 ]
Sui L. [1 ]
Nie S.-F. [1 ]
Zhou T.-H. [1 ]
Yuan T.-T. [2 ]
机构
[1] School of Civil Engineering, Chang'an University, Xi'an
[2] China Railway First Survey and Design Institute Group Co., Ltd., Xi'an
来源
Gongcheng Lixue/Engineering Mechanics | 2022年 / 39卷 / 04期
关键词
Calculation model; Cold-formed steel; Composite walls; Lightweight gypsum fillings; Shear bearing capacity;
D O I
10.6052/j.issn.1000-4750.2021.02.0126
中图分类号
学科分类号
摘要
In order to calculate the shear bearing capacity of cold-formed steel (CFS) composite walls with lightweight gypsum infillings, the full scale specimens including two unfilled walls and nine infilled walls were tested under reversed cyclic loading. The failure modes of the walls under horizontal loads were studied. The test results show that the failure modes of unfilled CFS walls are characterized by the screw connections between sheathings and CFS frames, thus causing the loss of stressed skin provided by sheathings. There are two possible failure modes of CFS walls with fillings. One is the compressive failure at the corner of gypsum fillings, and the other is the flexural failure of CFS studs. According to above-mentioned failure modes and limit equilibrium theory, a shear bearing capacity calculation model based on superposition method is proposed considering the contributions of sheathings and infill materials. Then the calculation equations of shear bearing capacity are also derived. The model can reflect the impact of screw connections strength, infill material strength and CFS frames strength on shear bearing capacity of the walls. The ratios of the theoretical calculation values to the test values are between 0.947 and 1.112, which demonstrates that the theoretical calculation values have a good agreement with tests values. Copyright ©2022 Engineering Mechanics. All rights reserved.
引用
收藏
页码:177 / 186
页数:9
相关论文
共 26 条
[1]  
Hao Jiping, Sun Xiaoling, Xue Qiang, Et al., Research and applications of prefabricated steel structure building systems, Engineering Mechanics, 34, 1, pp. 1-13, (2017)
[2]  
Ye Lu, Wang Yuhang, Shi Yu, Et al., Study on the mechanical properties of cold-formed steel framed shear wall with slits, Engineering Mechanics, 37, 11, pp. 156-166, (2020)
[3]  
Chen Ming, Wang Qi, Seismic behavior of cold-formed double C steel frame filled with steel plate walls, Engineering Mechanics, 35, 12, pp. 175-184, (2018)
[4]  
Wu Hanheng, Zhou Tianhua, Shi Yu, Et al., Simplified calculation of elastoplastic displacement for cold-formed thin-walled steel buildings under earthquakes, Engineering Mechanics, 30, 7, pp. 180-186, (2013)
[5]  
Zhou Xuhong, Shi Yu, Zhou Tianhua, Et al., Experimental study on the shear resistance of cold-formed steel stud walls, Journal of Civil Engineering, 43, 5, pp. 38-44, (2010)
[6]  
Mohebbi S, Mirghaderi R, Farahbod F, Et al., Experimental work on single and double-sided steel sheathed cold-formed steel shear walls for seismic actions, Thin-walled Structures, 91, pp. 50-62, (2015)
[7]  
Ahmed R B, Hazem H E, Sherif A M., Numerical and experimental investigation on cold-formed walls sheathed by fiber cement board, Journal of Constructional Steel Research, 158, pp. 366-380, (2019)
[8]  
Derveni F, Gerasimidis S, Peterman K D., Behavior of cold-formed steel shear walls sheathed with high-capacity sheathing, Engineering Structures, 225, (2020)
[9]  
Zeynalian M, Ronagh H R., A numerical study on seismic characteristics of knee-braced cold formed steel shear walls, Thin-walled Structures, 49, 2, pp. 1517-1525, (2011)
[10]  
Zeynalian M, Ronagh H R, Hatami S., Seismic characteristics of K-braced cold-formed steel shear walls, Journal of Constructional Steel Research, 77, pp. 23-31, (2012)