Influence of Hastelloy’s cathodic cage plasma deposition on corrosion resistance of AISI 304 stainless steel and of AISI D6 tool steel

被引：0
作者：
Costa P.M.O. [1 ]
Serra P.L.C. [2 ]
Monção R.M. [2 ]
de Menezes A.S. [3 ]
Borges F.M.R. [4 ]
de Carvalho Costa T.H. [5 ]
de Sousa R.R.M. [2 ]
机构：
[1] Universidade Federal do Piauí, Departamento de Mecânica, Teresina, PI
[2] Universidade Federal do Piauí, Programa de Pós-Graduação em Ciência e Engenharia de Materiais, Teresina, PI
[3] Universidade Federal do Maranhão, Departamento de Física, São Luís, MA
[4] Instituto Federal do Maranhão, Departamento de Mecânica e Materiais, São Luís, MA
[5] Universidade Federal do Rio Grande do Norte, Departamento de Mecânica, Natal, RN
来源：
Materials Research | 2021年 / 24卷 / 01期
关键词：
AISI; 304; AISI D6; Cathodic cage; Corrosion resistance; Hastelloy;
D O I：
10.1590/19020-080-5373-MR-2267
中图分类号：
学科分类号：
摘要：
AISI D6 tool steel and AISI 304 stainless steel are among the most widely used material in the industry. However, this application field can still be expanded through the coatings deposition. In this regard, the objective of this work was to evaluate the impact of coatings application by cathodic cage technique using Hastelloy’s cathodic cage, on corrosion resistance of these steels. Two treatment temperatures were compared. The samples were characterized by Optical Microscopy, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, X-Ray Diffraction with the application of the Rietveld routine and corrosion test. The results showed the formation of multiphase layers that contributed to corrosion potentials reduction for treatments at 400 °C, being more effective when applied on AISI D6. It was observed that the corrosion resistance is influenced by the temperature, which was attributed to the precipitation of chromium nitride and iron oxide at 450 ºC. © 2021 Universidade Federal de Sao Carlos. All rights reserved.
引用
收藏
相关论文
共 60 条
[1]  
Souza RR, Brandim AS, Oliveira MD, Alves C, Aço ferramenta para trabalho a frio Aisi D6 tratado termicamente e nitretato em plasma, Rev Bras Apl Vácuo, 27, pp. 223-227, (2008)
[2]  
Rahman M, Haider J, Hashmi MSJ., Low temperature plasma nitriding of 316 stainless steel by a saddle field fast atom beam source, Surf Coat Tech, 200, 5–6, pp. 1645-1651, (2005)
[3]  
Wang S, Cai W, Li J, Wei W, Hu J., A novel rapid D.C. plasma nitriding at low gas pressure for 304 austenitic stainless steel, Mater Lett, 105, pp. 47-49, (2013)
[4]  
Naeem M, Shafiq M, Zaka-ul-Islam M, Nawaz N, Diaz-Guillen JC, Zakaullah M., Effect of cathodic cage size on plasma nitriding of AISI 304 steel, Mater Lett, 181, pp. 78-81, (2016)
[5]  
Vehovar L, Tandler M., Stainless steel containers for the storage of low and medium level radioactive waste, Nucl Eng Des, 206, 1, pp. 21-33, (2001)
[6]  
Li Y, Zhang S, He Y, Zhang L, Wang L., Characteristics of the nitrided layer formed on AISI 304 austenitic stainless steel by high temperature nitriding assisted hollow cathode discharge, Mater Des, 64, pp. 527-534, (2014)
[7]  
Abedi HR, Salehi M, Yazdkhasti M, Hemmasian-E A., Effect of high temperature post-oxidizing on tribological and corrosion behavior of plasma nitrided AISI 316 austenitic stainless steel, Vacuum, 85, 3, pp. 443-447, (2010)
[8]  
Naeem M, Shafiq M, Zaka-ul-Islam M, Diaz-Guillen JC, Lopez-Badillo CM, Ullah N, Et al., Improved surface properties of AISI-304 by novel duplex cathodic cage plasma nitriding, Mater Lett, 189, pp. 213-216, (2017)
[9]  
Napiorkowski J, Szczyglak P, Ligier K, Kuczynski R., Testing the wear intensity of thin coatings by the ball-cratering method in the process of selecting punching die materials, J Balk Tribol Assoc, 22, 1, pp. 346-352, (2016)
[10]  
Rousseau AF, Partridge JG, Mayes ELH, Toton JT, Kracica M, McCulloch DG, Et al., Microstructural and tribological characterisation of a nitriding/TiAlN PVD coating duplex treatment applied to M2 high speed steel tools, Surf Coatings Technol, 272, pp. 403-408, (2015)
123456