A self-driven mechanical ventilated solar air collector: Design and experimental study

被引:4
作者
Hu, Jianjun [1 ]
Zhang, Guangqiu [1 ]
Zhu, Qing [1 ]
Guo, Meng [1 ]
Chen, Lijuan [2 ]
机构
[1] Yanshan Univ, Sch Civil Engn & Mech, Qinhuangdao 066004, Hebei, Peoples R China
[2] Nanjing Inst Technol, Nanjing 210000, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
Solar air collector; Self-driven; Photoelectric; Thermal efficiency; THERMAL PERFORMANCE; FLAT-PLATE; DOUBLE-PASS; FRICTION FACTOR; HEAT-TRANSFER; SYSTEM; IMPROVEMENT; BAFFLE; OPTIMIZATION; EFFICIENCY;
D O I
10.1016/j.energy.2019.116287
中图分类号
O414.1 [热力学];
学科分类号
摘要
In order to reduce the limitation of solar air collectors in application and apply them to some places where the urban power grid can not reach. The new concept of self-driven mechanical ventilated solar air collector (SDSAC) was proposed and realized in actual device. The structure and electrical system of SDSAC were designed and fabricated based on the above objective. Experimental studies were carried out to investigate the working performance of SDSAC by comparing it with a natural ventilated solar air collector (NVSAC). The results indicate that the small-scale NVSAC is unstable and less efficient, and the phenomenon of back flow occurs frequently during the working process. The self-sustained operation of SDSAC was realized in the experiment, and the working process can be categorized into five stages based on the outlet temperature of SDSAC. Specially, there exists a quasi-steady-state in which the outlet temperature, the flow rate and the thermal efficiency are almost constant for about 2 h, and the average thermal efficiency of SDSAC can reach up to 49.2%, which is far better than NVSAC with an average thermal efficiency about 11.5%. Optimization work should be done to achieve constant working performance in the full operation time. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:13
相关论文
共 45 条
[21]   Research on operation strategy and performance prediction of flat plate solar collector with dual-function for drying agricultural products [J].
Hao, Wengang ;
Lu, Yifeng ;
Lai, Yanhua ;
Yu, Hongwen ;
Lyu, Mingxin .
RENEWABLE ENERGY, 2018, 127 :685-696
[22]   Experimental study on the performance of double pass and two inlet ports solar air heater (SAH) at different configurations of the absorber plate [J].
Hassan, Hamdy ;
Abo-Elfadl, Saleh .
RENEWABLE ENERGY, 2018, 116 :728-740
[23]   Performance improvement of baffle-type solar air collector based on first chamber narrowing [J].
Hu, Jianjun ;
Liu, Kaitong ;
Guo, Meng ;
Zhang, Guangqiu ;
Chu, Zhongliang ;
Wang, Meida .
RENEWABLE ENERGY, 2019, 135 :701-710
[24]   Parameter optimization of solar air collectors with holes on baffle and analysis of flow and heat transfer characteristics [J].
Hu, Jianjun ;
Liu, Kaitong ;
Ma, Long ;
Sun, Xishan .
SOLAR ENERGY, 2018, 174 :878-887
[25]   Numerical analysis of mechanical ventilation solar air collector with internal baffles [J].
Hu, Jianjun ;
Sun, Xishan ;
Xu, Jinliang ;
Li, Zhixian .
ENERGY AND BUILDINGS, 2013, 62 :230-238
[26]   Similarity analysis of parabolic-trough solar collectors [J].
Jin, Jian ;
Ling, Yunyi ;
Hao, Yong .
APPLIED ENERGY, 2017, 204 :958-965
[27]   Experimental study and correlation development for Nusselt number and friction factor for discretized broken V-pattern baffle solar air channel [J].
Kumar, Raj ;
Chauhan, Ranchan ;
Sethi, Muneesh ;
Kumar, Anil .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2017, 81 :56-75
[28]   Heat transfer and friction factor correlations for solar air collectors with hemispherical protrusion artificial roughness on the absorber plate [J].
Li Shui-lian ;
Meng Xiang-rui ;
Wei Xin-li .
SOLAR ENERGY, 2015, 118 :460-468
[29]   Study on the thermal performance of a novel cavity receiver for parabolic trough solar collectors [J].
Liang, Hongbo ;
Zhu, Chunguang ;
Fan, Man ;
You, Shijun ;
Zhang, Huan ;
Xia, Junbao .
APPLIED ENERGY, 2018, 222 :790-798
[30]   Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector [J].
Liu, Zhen-Hua ;
Hu, Ren-Lin ;
Lu, Lin ;
Zhao, Feng ;
Xiao, Hong-shen .
ENERGY CONVERSION AND MANAGEMENT, 2013, 73 :135-143