3D preoperative predictions of in vivo hip stability and edge loading for neutral and lipped liners

Hip dislocation is one of the leading causes of failure and revision surgery for total hip arthroplasty. To reduce dislocation rates, lipped liners have been designed with an elevated portion of the rim, to increase jump distance and maintain greater contact area. While it has been documented that lipped liners help reduce dislocation, the objective of this study is to investigate whether lipped liners also help reduce smaller instances of hip micromotion, separation, and edge loading. This study uses an advanced three-dimensional preoperative planning tool to analyze 10 patients, each implanted with both a neutral and lipped liner. Patients within the simulation performed stance phase of gait, and each cup was implanted with the rotation center aligned with the preoperative acetabulum center as well as shifted medially by 2, 4, 6, 8, and 10 mm, yielding 120 total simulations. Specific postoperative outcomes-of-interest included specified component offset, resultant in vivo hip forces, hip separation, and contact area to evaluate edge loading. The planner predicted a reduction in hip separation and an increase in articulating contact area for when using a lipped liner compared to a neutral liner. Additionally, regardless of liner type, increases in hip separation corresponded to decreases in contact area, therefore resulting in edge loading of the liner. Together, this indicates that improper component alignment and offsets may lead to an increase in hip separation and edge loading, but the use of a lipped liner may provide improved stability and resistance to this micromotion.