Profile Analysis Method Based on Point Cloud Scanning of Blade Profile

被引：0
|
作者：
Ding J. [1 ,2 ]
Lu G. [1 ,2 ]
Sun L. [1 ,2 ,3 ]
Jiang Z. [1 ,2 ]
机构：
[1] School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an
[2] State Key Laboratory of Mechanical System, Xi’an Jiaotong University, Xi’an
[3] State Key Laboratory of Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2022年 / 58卷 / 17期
关键词：
aviation blades; blade section analysis; point cloud; profile extraction;
D O I：
10.3901/JME.2022.17.041
中图分类号：
学科分类号：
摘要：
Aiming at the problems of slow processing speed and poor shape characteristics of optical measurement of massive point cloud on aero-engine blade, a precise analysis algorithm of blade measurement point cloud profile based on profile reconstruction was proposed. This algorithm is able to make full use of the advantage that optical measurement can cover the whole leaf, including point cloud preprocessing, contour extraction and contour analysis. Firstly, Blade height cutting of the point cloud is according to the specifications for blade design. Then, the measured point cloud is processed by using statistical methods to filter rapidly, and the octree data structure is used for voxel sampling of the point cloud. For the point cloud pretreated above, profile reconstruction is carried out by using the regional growth method to acquire profile data. Finally, the method of profile analysis is introduced to calculate the characteristic parameters of blade profile and optimize the solution of profile error. © 2022 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：41 / 48
页数：7
相关论文
共 13 条
  • [1] LI Xuezhe, SHI Zhaoyao, CHEN Hongfang, Et al., Current status and trends of aeroengine blade profile metrology[J], Journal of Beijing University of Technology, 43, 4, pp. 557-565, (2017)
  • [2] MENG Na, Research on data processing technology based on laser scanning point cloud, (2009)
  • [3] LIU Yunfeng, KE Yinglin, Hybrid slicing technology in reverse engineering[J], Journal of Computer-aided Design & Computer Graphics, 15, 6, pp. 741-745, (2003)
  • [4] WANG Jin, Measurement points curve fitting and contour error evaluationfor blade surface[J], Aeronautical Manufacturing Technology, 451, 7, pp. 88-90, (2014)
  • [5] CHEN Zhiqiang, Research on extraction technology of blade section feature parameters based on measured data, (2007)
  • [6] YU Kuahai, Multidisciplinary design optimization for cooling turbine blade of aeroengine, (2006)
  • [7] WANG Junwei, Research on parameter mesh optimization technology in blade surface modeling, (2003)
  • [8] LI Bing, DING Jianjun, JIANG Zhuangde, Et al., Novel sectional profile matching algorithm for gas turbine blades based on curve chord-length invariant feature[J], Journal of Xi’an Jiaotong University, 43, 1, pp. 81-84, (2009)
  • [9] ZHANG Meng, Registration technology of point cloud based on improved ICP algorithm, (2013)
  • [10] LIU Zhiwei, CHEN Songlin, ZHANG Hongyao, Et al., Online automatic measuring method for blade surface[J], Tool Engineering, 51, 2, pp. 94-98, (2017)
12