Investigation of surface properties for additively manufactured SS316L parts: Effect of post-processing techniques

被引：0
作者：
Sahlot P. [1 ]
Suthar M. [1 ]
Wankhede V.A. [1 ]
机构：
[1] Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Gujarat, Gandhinagar
来源：
Materials Today: Proceedings | 2023年 / 80卷
关键词：
Additive Manufacturing; Post-processing; Selective laser melting; Shot peening; Nitriding; SS316L;
D O I：
10.1016/j.matpr.2022.10.187
中图分类号：
学科分类号：
摘要：
This research work aimed to investigate mechanical and surface properties of post-processed stainless steel 316L (SS316L) fabricated through additive manufacturing (AM) process. The AM printed samples were post-processed by nitriding and shot peening process and used for different surface characterizations such as surface roughness, hardness and microstructure. The results showed improved surface roughness of shot peening part and increase in hardness after post-processing. The improvement in the surface roughness has been significant of around 43 % to 62 % at different energy density. The improvement in hardness is more for nitrided parts as compared to the shot peening. © 2022
引用
收藏
页码：395 / 399
页数：4
相关论文
共 50 条
[31]   Investigation of Post-Processing of Additively Manufactured Nitinol Smart Springs with Plasma-Electrolytic Polishing [J].
Stepputat, Vincent N. ;
Zeidler, Henning ;
Safranchik, Daniel ;
Strokin, Evgeny ;
Boettger-Hiller, Falko .
MATERIALS, 2021, 14 (15)
[32]   Post processing of additively manufactured 316L stainless steel by multi-jet polishing method [J].
Wang, Chunjin ;
Loh, Yee Man ;
Cheung, Chi Fai ;
Liang, Xiaoliang ;
Zhang, Zili ;
Ho, Lai Ting .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 :530-550
[33]   Influence of temperature on corrosion behavior of additively manufactured SS316L stainless steel in CO2-saturated brine solution [J].
Ansari, Nooruddin ;
Alabtah, Fatima Ghassan ;
Khraisheh, Marwan .
MATERIALS LETTERS, 2024, 376
[34]   Two-Step Laser Post-Processing for the Surface Functionalization of Additively Manufactured Ti-6Al-4V Parts [J].
Solheid, Juliana S. ;
Wunsch, Torsten ;
Trouillet, Vanessa ;
Weigel, Simone ;
Scharnweber, Tim ;
Seifert, Hans Juergen ;
Pfleging, Wilhelm .
MATERIALS, 2020, 13 (21) :1-18
[35]   Efficient utilization of remelt strategy for improving relative density and surface integrity to eliminate necessity of performing post-processing of additively manufactured 316L stainless steel [J].
Rajabi, Sajjad ;
Khodabandeh, Alireza ;
Sadeghi, Mohamad Sina ;
Amirshami, Masood ;
Etefagh, Ardeshir Hemasian ;
Khajehzadeh, Mohsen ;
Razfar, Mohammad Reza .
PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (01) :309-326
[36]   Investigation of the Effect of Aluminium Addition on the Additively Manufactured SS309L Alloy [J].
Ali, Rania ;
Al-Zubaidy, Basem .
ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2024, 48 (02) :177-186
[37]   Surface Properties of Additively Manufactured 316L Steel Subjected to Ultrasonic Rolling [J].
Xu, Qingzhong ;
Qiu, Zhihao ;
Jiang, Dewen ;
Cai, Gangjun ;
Yang, Xiao ;
Liu, Junjie ;
Li, Gen .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (02) :1733-1742
[38]   Experimental Investigation of Magnetic Abrasive Finishing for Post-Processing Additive Manufactured Inconel 939 Parts [J].
Marczak, Michal ;
Moszczynska, Dorota A. ;
Wawrzyszcz, Aleksander P. .
APPLIED SCIENCES-BASEL, 2025, 15 (15)
[39]   Effect of Laser Processing on Surface Properties of Additively Manufactured 18-Percent Nickel Maraging Steel Parts [J].
Cernasejus, Olegas ;
Skamat, Jelena ;
Markovic, Vladislav ;
Visniakov, Nikolaj ;
Indrisiunas, Simonas .
COATINGS, 2020, 10 (06)
[40]   Enhancing Fatigue Performance of Additively Manufactured Ti6Al4V - The Role of Surface Characteristics and Post-Processing Techniques [J].
Kurek, Andrzej ;
Zrodowski, Lukasz ;
Choma, Tomasz ;
Abramczyk, Izabela ;
Klonica, Mariusz ;
Wachowski, Marcin .
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (06) :280-290
12345