Size effect law for nominal strength of stirrup-confined circular concrete columns under axial compression

被引：0
|
作者：
Jin L. [1 ]
Li P. [1 ]
Du X.-L. [1 ]
Li D. [1 ,2 ]
机构：
[1] The key laboratory of Urban Security and Disaster Engineering, Beijing University of Technology, Beijing
[2] Department of Civil Engineering, Tsinghua University, Beijing
来源：
Du, Xiu-Li (duxiuli@bjut.edu.cn) | 1600年 / Tsinghua University卷 / 37期
关键词：
Axial compressive strength; Circular column; Reinforced concrete (RC); Size effect law; Stirrup-confined;
D O I：
10.6052/j.issn.1000-4750.2019.04.0166
中图分类号：
学科分类号：
摘要：
The failure modes and mechanisms of reinforced concrete (RC) members are far different from those of the concrete material. It is therefore debatable to use the size effect theory and formula based on the concrete material to describe the size effect of RC members. Moreover, the size effect formula of the concrete material is difficult to describe the influence of other important structural parameters on the size effect of RC structural members. Taking circular concrete columns confined by stirrups for the research objects, combined with the physical test and numerical results, the main parameter of stirrup ratio that affects the size effect of nominal compressive strength was revealed. Furthermore, combined with the influence mechanism of the confining effect on the axial compressive strength of RC columns and based on the basic theory of the Size Effect Law (SEL) proposed by Bažant, a semi-theoretical and semi-empirical formula for the size effect of the uniaxial compressive strength of stirrup-confined RC columns was established. The experimental and numerical results in the present study as well as other experimental data verify the accuracy and rationality of thesemi-theoretical and semi- empirical formula of the size effect on the RC member level. © 2020, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：64 / 73
页数：9
相关论文
共 31 条
  • [1] Tung N.D., Tue N.V., A fracture mechanics-based approach to modeling the confinement effect in reinforced concrete columns, Construction and Building Materials, 102, pp. 893-903, (2016)
  • [2] Zhou X., Yan B., Liu J., Behavior of square tubed steel reinforced-concrete (SRC) columns under eccentric compression, Thin-Walled Structures, 91, pp. 129-138, (2015)
  • [3] Dundar C., Erturkmen D., Tokgoz S., Studies on carbon fiber polymer confined slender plain and steel fiber reinforced concrete columns, Engineering Structures, 102, pp. 31-39, (2015)
  • [4] Lu X., Hsu C.T.T., Behavior of high strength concrete with and without steel fiber reinforcement in triaxial compression, Cement and Concrete Research, 36, 9, pp. 1679-1685, (2006)
  • [5] Liu J., Sheikh S.A., Glass Fiber-Reinforced Polymer-Reinforced Circular Columns under Simulated Seismic Loads, ACI Structural Journal, 112, 1, pp. 103-114, (2015)
  • [6] Mander J.B., Priestley M.J.N., Park R., Theoretical stress-strain model for confined concrete, Journal of Structural Engineering, 114, 8, pp. 1804-1826, (1988)
  • [7] Kent D.C., Park R., Flexural members with confined concrete, Journal of the Structural Division, 97, 7, pp. 1969-1990, (1971)
  • [8] Sheikh S.A., Uzumeri S.M., Analytical model for concrete confinement in tied columns, Journal of the Structural Division, 108, 12, pp. 2703-2722, (1982)
  • [9] Legeron F., Paultre P., Uniaxial confinement model for normal-and high-strength concrete columns, Journal of Structural Engineering, 129, 2, pp. 241-252, (2003)
  • [10] Guo Z., Zhang X., Zhang D., Et al., Experimental investigation of the complete stress-strain curve of concrete, Journal of Building Structures, 3, 1, pp. 1-12, (1982)
1234