Application status of steel slag asphalt mixture

被引：0

作者：

He L. ^{[1
]}

Zhan C.-Y. ^{[1
]}

Lyu S.-T. ^{[2
]}

Grenfell J. ^{[3
]}

Gao J. ^{[1
]}

Kowalski K.J. ^{[4
]}

Valentin J. ^{[5
]}

Xie J. ^{[6
]}

Ržek L. ^{[7
]}

Ling T.-Q. ^{[1
]}

机构：

[1] National and Local Joint Engineering Laboratory of Traffic Civil Engineering Materials, Chongqing Jiaotong University, Chongqing

[2] Key Laboratory of Special Environment Road Engineering of Hunan Province, Changsha University of Science and Technology, Changsha, 410114, Hunan

[3] The Australian Road Research Board, Melbourne, VIC3207, VIC

[4] Faculty of Civil Engineering, Warsaw University of Technology, Warsaw, 00-637, Mazowieckie

[5] Faculty of Civil Engineering, Czech Technical University in Prague, Prague

[6] State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, 430070, Hubei

[7] The Laboratory for Asphalts and Bitumen-Based Products, Slovenian National Building and Civil Engineering Institute, Ljubljana

来源：

Jiaotong Yunshu Gongcheng Xuebao/Journal of Traffic and Transportation Engineering | 2020年 / 20卷 / 02期

基金：

中国国家自然科学基金;

关键词：

Asphalt mixture; Characteristic parameter; Environmental benefit; Mix design; Pavement engineering; Pavement performance; Steel slag;

D O I：

10.19818/j.cnki.1671-1637.2020.02.002

中图分类号：

学科分类号：

摘要：

The physical properties, chemical composition and mineral phases of different steel slags were summarized. The factors that affect the volume stability and improvement measures were analysed. The mix design method for steel slag asphalt mixtures was discussed. The road performance (high temperature stability, low temperature crack resistance, moisture susceptibility, fatigue resistance, volume stability, and skid resistance) and functional characteristics (conductivity and microwave heating ability) of steel slag asphalt mixture were all investigated. The benefits of steel slag asphalt mixtures in ecology, society and economy were studied, and the engineering applications at home and abroad were introduced. Research result indicates that certain steel slag can be used for asphalt mixtures, and the steel slag for asphalt mixtures should be the basic oxygen furnace and electric arc furnace aged for more than half a year. The steel slag has excellent physical and mechanical properties, whilst the chemical composition and mineral phase composition are different for each slag type and affected by the steel making process. The lack of volume stability of steel slag can be improved with a pre-treatment or aging treatment. The key points of mix design of steel slag asphalt mixture include the mode and proportion of steel slag that can replace traditional aggregates, the gradation correction of asphalt mixture, the determination of effective relative density and the optimum asphalt-aggregate ratio. The pavement performances and functional properties of steel slag asphalt mixtures are better than those of natural aggregate asphalt mixtures. The use of steel slag asphalt mixture is of benefit to the environment and saves cost. The research on the road performance of steel slag asphalt mixture is additional, but the mechanism of action is relatively lacking. The key limiting factors such as the large density, poor volume stability, and the increasing amount of asphalt mixture have not been fundamentally resolved. In the future, the long-term performance and quality control system of steel slag asphalt pavement should be researched, and the whole life cycle research should be carried out to accelerate the application and promotion of steel slag asphalt pavement. © 2020, Editorial Department of Journal of Traffic and Transportation Engineering. All right reserved.

引用

页码：15 / 33

页数：18

共 101 条

[61] XIANG Xiao-dong, ZHOU Xi-ying, LI Can-hua, Et al., Design and performance of OGFC-13 steel slag asphalt mixture, Journal of Wuhan University of Science and Technology, 36, 6, pp. 424-427, (2013)
[62] PASETTO M, BALIELLO A, GIACOMELLO G, Et al., Rheological characterization of warm-modified asphalt mastics containing electric arc furnace steel slags, Advances in Materials Science and Engineering, 3, pp. 1-11, (2016)
[63] SKAF M, MANSO J M, ARAGON A, Et al., EAF slag in asphalt mixes: a brief review of its possible re-use, Resources, Conservation and Recycling, 120, pp. 176-185, (2017)
[64] ARABANI M, AZARBOOSH A R., The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures, Construction and Building Materials, 35, pp. 1-7, (2012)
[65] YANG Yong-li, WU Jian-ming, ZHANG Jian-qiang, Research on mix design and pavement performance of SMA-13 asphalt mixture with steel slag, Road Machinery and Construction Mechanization, 33, 7, pp. 36-40, (2016)
[66] DING Qing-jun, LI Chun, PENG Bo, Et al., Study of the practicability of asphalt concrete confected by steel slag, Journal of Wuhan University of Technology, 23, 6, pp. 9-13, (2001)
[67] LU Fa-liang, LI Jin, Study on road performance of Jigang steel slag asphalt mixture, Journal of China and Foreign Highway, 33, 4, pp. 259-263, (2013)
[68] XUE Yong-jie, Study on the preparation and performance of steel slag mastic asphalt mixture, (2005)
[69] HU Jin-long, SUN Da-quan, Application research of steel slag in asphalt concrete, East China Highway, 6, pp. 54-57, (2014)
[70] CHEN J S, WEI S H., Engineering properties and performance of asphalt mixtures incorporating steel slag, Construction and Building Materials, 128, pp. 148-153, (2016)

← 2 3 4 5 6 7 8 9 10 11 →