Application status of steel slag asphalt mixture

被引：0

作者：

He L. ^{[1
]}

Zhan C.-Y. ^{[1
]}

Lyu S.-T. ^{[2
]}

Grenfell J. ^{[3
]}

Gao J. ^{[1
]}

Kowalski K.J. ^{[4
]}

Valentin J. ^{[5
]}

Xie J. ^{[6
]}

Ržek L. ^{[7
]}

Ling T.-Q. ^{[1
]}

机构：

[1] National and Local Joint Engineering Laboratory of Traffic Civil Engineering Materials, Chongqing Jiaotong University, Chongqing

[2] Key Laboratory of Special Environment Road Engineering of Hunan Province, Changsha University of Science and Technology, Changsha, 410114, Hunan

[3] The Australian Road Research Board, Melbourne, VIC3207, VIC

[4] Faculty of Civil Engineering, Warsaw University of Technology, Warsaw, 00-637, Mazowieckie

[5] Faculty of Civil Engineering, Czech Technical University in Prague, Prague

[6] State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, 430070, Hubei

[7] The Laboratory for Asphalts and Bitumen-Based Products, Slovenian National Building and Civil Engineering Institute, Ljubljana

来源：

Jiaotong Yunshu Gongcheng Xuebao/Journal of Traffic and Transportation Engineering | 2020年 / 20卷 / 02期

基金：

中国国家自然科学基金;

关键词：

Asphalt mixture; Characteristic parameter; Environmental benefit; Mix design; Pavement engineering; Pavement performance; Steel slag;

D O I：

10.19818/j.cnki.1671-1637.2020.02.002

中图分类号：

学科分类号：

摘要：

The physical properties, chemical composition and mineral phases of different steel slags were summarized. The factors that affect the volume stability and improvement measures were analysed. The mix design method for steel slag asphalt mixtures was discussed. The road performance (high temperature stability, low temperature crack resistance, moisture susceptibility, fatigue resistance, volume stability, and skid resistance) and functional characteristics (conductivity and microwave heating ability) of steel slag asphalt mixture were all investigated. The benefits of steel slag asphalt mixtures in ecology, society and economy were studied, and the engineering applications at home and abroad were introduced. Research result indicates that certain steel slag can be used for asphalt mixtures, and the steel slag for asphalt mixtures should be the basic oxygen furnace and electric arc furnace aged for more than half a year. The steel slag has excellent physical and mechanical properties, whilst the chemical composition and mineral phase composition are different for each slag type and affected by the steel making process. The lack of volume stability of steel slag can be improved with a pre-treatment or aging treatment. The key points of mix design of steel slag asphalt mixture include the mode and proportion of steel slag that can replace traditional aggregates, the gradation correction of asphalt mixture, the determination of effective relative density and the optimum asphalt-aggregate ratio. The pavement performances and functional properties of steel slag asphalt mixtures are better than those of natural aggregate asphalt mixtures. The use of steel slag asphalt mixture is of benefit to the environment and saves cost. The research on the road performance of steel slag asphalt mixture is additional, but the mechanism of action is relatively lacking. The key limiting factors such as the large density, poor volume stability, and the increasing amount of asphalt mixture have not been fundamentally resolved. In the future, the long-term performance and quality control system of steel slag asphalt pavement should be researched, and the whole life cycle research should be carried out to accelerate the application and promotion of steel slag asphalt pavement. © 2020, Editorial Department of Journal of Traffic and Transportation Engineering. All right reserved.

引用

页码：15 / 33

页数：18

共 101 条

[11] XUE Yong-jie, WU Shao-peng, Research on experimental of pavement performance of steel slag SMA, Highway, 2, pp. 126-129, (2006)
[12] HAININ M R, AZIZ M M A, ALI Z, Et al., Steel slag as a road construction material, Journal Teknologi (Sciences and Engineering), 73, 4, pp. 33-38, (2015)
[13] DIAZ R O, FARFAN M R, CARDENAS J, Et al., Use of steel slag as a new material for roads, Journal of Physics: Conference Series, 935, pp. 11-16, (2017)
[14] Use of steel slag aggregate in pavements, (2015)
[15] YILDIRIM I Z, PREZZI M., Experimental evaluation of EAF ladle steel slag as a geo-fill material: mineralogical, physical and mechanical properties, Construction and Building Materials, 154, pp. 23-33, (2017)
[16] DHOBLE Y N, AHMED S., Review on the innovative uses of steel slag for waste minimization, Journal of Material Cycles and Waste Management, 20, 3, pp. 1373-1382, (2018)
[17] LI Chao, CHEN Zong-wu, XIE Jun, Et al., A technological and applicational review on steel slag asphalt mixture, Materials Review, 31, 2, pp. 86-95, (2017)
[18] CHEN Zong-wu, XIE Jun, XIAO Xue, Et al., Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder, Construction and Building Materials, 64, pp. 60-66, (2014)
[19] SHI Cai-jun, Steel slag-its production, processing, characteristics, and cementitious properties, Journal of Materials in Civil Engineering, 16, 3, pp. 230-236, (2004)
[20] ZHAO Ji-hui, YAN Pei-yu, WANG Dong-min, Research on mineral characteristics of converter steel slag and its comprehensive utilization of internal and external recycle, Journal of Cleaner Production, 156, pp. 50-61, (2017)

← 1 2 3 4 5 6 7 8 9 10 →