Thermal and mechanical properties of Fe2Zr

被引：4

作者：

Okada D. ^{[1
]}

Ishii H. ^{[1
]}

Ohishi Y. ^{[1
]}

Muta H. ^{[1
]}

Kurosaki K. ^{[1
,2
,3
]}

机构：

[1] Graduate School of Engineering, Osalw University, 2-1 Yamadaolw, Suita-shi, Osaka

[2] Research Institute of Nuclear Engineering, University of Fukui, 1-3-33 Kanawacho, Tsuruga-shi, Fukui

[3] JST, PRESTO, 4-1-8 Honcho, Kawaguchi-shi, Saitama

来源：

Transactions of the Atomic Energy Society of Japan | 2019年 / 18卷 / 01期

关键词：

Fe[!sub]2[!/sub]Zr; Fuel debris; Iron; Mechanical properties; Metallic phase; Thermophysical properties; Zirconium;

D O I：

10.3327/taesj.J18.011

中图分类号：

学科分类号：

摘要：

Following the accident at the Fukushima Daiichi Nuclear Power Plant in 2011, fuel debris formed in the reactor. It is important to understand the thermal and mechanical properties of the fuel debris. The fuel debris mainly consists of oxide, boride, and metallic phases. Although the physical properties of the oxide and boride phases have been widely investigated, those of the metallic phase have not been deeply studied. Here, we focus on Fe2Zr, which is considered to be the main component of the metallic phase. Ingots of Fe2Zr were synthesized by arc melting, then the ingots were crushed to powders, which was followed by spark plasma sintering to obtain high-density polycrystalline bulk samples. The thermal and mechanical properties such as thermal expansion coefficient, specific heat capacity, thermal diffusivity, thermal conductivity, sound velocity, elastic moduli, and Vickers hardness were examined, and the obtained data were compared with the literature data on the oxide and boride phases to obtain an overall understanding of the properties of the fuel debris. © 2019 Atomic Energy Society of Japan, All Rights Reserved.

引用

页码：37 / 42

页数：5

共 24 条

[1] Fukushima Nuclear Accident Analysis Report, (2012)
[2] Klein D., Corradini M., Fukushima Daiichi: ANS Committee Report, (2012)
[3] Tanabe F., Analysis of core melt accident in Fukushima Daiichi-Unit 1 nuclear reactor, J. Nucl. Sci. Technol., 48, 8, pp. 1135-1139, (2011)
[4] Takano M., Nishi T., Shirasu N., Characterization of solidified melt among materials of UO2 fuel and B4C control blade, J. Nucl. Sci. Technol., 51, 7-8, pp. 859-875, (2014)
[5] Hirooka S., Kato M., Morimoto K., Komeno A., Uchida T., Akashi M., Effect of oxygen-to-metal ratio on properties of corium prepared from UO2 and zircaloy-2, J. Nucl. Mater., 437, pp. 130-134, (2013)
[6] Nakamori F., Ohishi Y., Kumagai M., Muta H., Kurosaki K., Fukumoto K., Yamanaka S., Mechanical and thermal properties of Fe2B, Trans. At. Energy Soc. Jpn., 15, 4, pp. 223-228, (2016)
[7] Nakamori F., Ohishi Y., Muta H., Kurosaki K., Fukumoto K., Yamanaka S., Mechanical and thermal properties of bulk ZrB2, J. Nucl. Mater., 467, pp. 612-617, (2015)
[8] Pelton A., Leibowitz L., Blomquist R., Thermodynamic analysis of phase equilibria in the iron-zirconium system, J. Nu.Cl. Mater., 201, pp. 218-224, (1993)
[9] Ali K., Ghosh P.S., Arya A., A DFT study of structural, elastic and lattice dynamical properties of Fe2Zr and FeZr2 intermetallics, J. Alloys Compd., 723, pp. 611-619, (2017)
[10] Berry R., Raynor G., The crystal chemistry of the laves phases, Acta Cryst, 6, pp. 178-186, (1953)

← 1 2 3 →