Common PCB layout errors that cause products to fail to meet automotive EMC requirements

被引：3
作者：
Hubing T.H. [1 ]
机构：
[1] LearnEMC, LLC
来源：
IEEE Electromagnetic Compatibility Magazine | 2019年 / 8卷 / 03期
关键词：
D O I：
10.1109/MEMC.2019.8878242
中图分类号：
学科分类号：
摘要：
Designing automotive products that meet EMC requirements is not hard, and it's not rocket science. It's possible to consistently design and build components and systems that meet automotive EMC requirements on the first test pass. In fact, this is the norm at many companies, particularly where the cost and delays associated with testing, troubleshooting and fixing a product would be inconsistent with a successful marketing plan. © 2012 IEEE.
引用
收藏
页码：86 / 91
页数：5
相关论文
共 7 条
  • [1] (2019)
  • [2] Performance-based EMC design using a maximum radiated emissions calculator, Clemson University Vehicular Electronics Laboratory Technical Report, CVEL-13-049.1, (2013)
  • [3] Joffe E., Current, if not obstructed, will always flow in the 'path of least⋯, 2008 IEEE Int. Symp. On EMC, (2008)
  • [4] Dong X., Et al., Analysis of chip-level EMI using near-field magnetic scanning, Proc. Of the 2004 IEEE Int. Symp. Of EMC, pp. 174-177, (2004)
  • [5] Hubing T., Grounding, 2018 IEEE Int. Symp. On EMC, (2018)
  • [6] Knighten J.L., Et al., Pdn design strategies: Ii. Ceramic SMT decoupling capacitors-does location matter?, IEEE EMC Society Newsletter, (2006)
  • [7] Hubing T., Circuit board layout mistakes that limit the effectiveness of EMI filters, 2017 IEEE Int. Symp. On EMC, (2017)
1