Experimental study on bond-slip constitutive relationship between checkered c-shaped encased steel plate and concrete

被引:0
|
作者
Chen, Lihua [1 ]
Zhou, Lujie [1 ]
Wang, Chenggang [1 ]
Dong, Lijuan [1 ]
机构
[1] Hefei University of Technology, Hefei,230009, China
关键词
Bond slips - C-shaped - C-shaped steel encased concrete - Characteristic bond strength - Checkered steel plate - Load slip curve - Position functions - Push-out tests - Statistical regression - Steel plates;
D O I
暂无
中图分类号
学科分类号
摘要
In order to investigate the bond slip behavior of checkered c-shaped steel encased concrete composite beams with braces under load, a total of 12 checkered c-shaped steel encased concrete push-out specimens were tested based on the orthogonal design method, with the consideration of the bonding performance of steel and concrete affected by the height of the patterned steel plates, the concrete strength grade, the spacing of the brace, the width of the cross-section, and the flange form. Each specimen's relevant data, including the load-slip curves of the steel plate, the strain of the steel plate distributed along the longitudinal direction, and the characteristic bond strengths were all analyzed during the test. The experimental results show that the effect of increasing the pattern height is the most beneficial way to improve bond performance; the characteristic bond strength increases with the increase of the concrete strength and decreases with the increase of the sectional width-height ratio and brace spacing. Under the same conditions, the bonding of the specimens with the inward-bent flange outperforms that of the specimens with the outward-bent flange. With different effects being considered, the formula of characteristic bond strength is calculated by statistical regression and the average bond strength-loaded end-slip constitutive model is presented. Based on two introduced position functions, the local bond strength-relative slip constitutive model (τ-S) of different longitudinal positions are established. In general, the calculation results of the statistical regression formula are in good agreement with the experimental result, the average bond strength-loaded end-slip constitutive model fits in well with the test curves, and the τ-S model of different embedded positions satisfies the accuracy of the finite element analysis. © 2021
引用
收藏
相关论文
共 50 条
  • [31] Bond-slip considered beam-column elements for concrete encased steel column
    Zheng, Shan-Suo
    Zhang, Chuan-Chao
    Li, Lei
    Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics, 2011, 28 (06): : 909 - 914
  • [32] Interfacial performance and bond-slip constitutive model between steel and modified polyurethane concrete composites
    Huang, Fanglin
    Gao, Yingjie
    Meng, Xiandong
    Song, Xuming
    Feng, Fan
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 397
  • [33] Experimental Study on Bond-Slip Behavior between H-Shaped Steel and Gypsum Cover in SGFCG
    Sun, Tao
    Ma, Kejian
    Chen, Zhihua
    Chen, Jin
    Zhu, Yuhao
    JOURNAL OF ENGINEERING, 2020, 2020
  • [34] Experimental study on bond-slip behavior and bearing capacity of corrugated steel plate concrete composite member with stud
    Wang W.
    Zhao C.-L.
    Su S.-Q.
    Ren T.
    Liu G.-W.
    Dong C.-Y.
    Gongcheng Lixue/Engineering Mechanics, 2019, 36 (09): : 108 - 119
  • [35] Experimental study on bond-slip behavior of concrete-encased concrete-filled steel tubular stub columns after high temperature
    Xiang K.
    Pan Y.
    Song T.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2019, 40 : 149 - 155
  • [36] Theoretical model for the bond-slip relationship between ribbed steel bars and confined concrete
    Zhao, Weiping
    Zhu, Binrong
    STRUCTURAL CONCRETE, 2018, 19 (02) : 548 - 558
  • [37] Bond-Slip Behavior between Stainless Steel Rebars and Concrete
    Pauletta, Margherita
    Rovere, Nicola
    Randl, Norbert
    Russo, Gaetano
    MATERIALS, 2020, 13 (04)
  • [38] Bond-slip behavior between corroded I-shaped steel and concrete in a subsea tunnel
    Zhang, Yiteng
    Wang, Mingnian
    Yu, Li
    Guo, Xiaohan
    Wang, Zhuhong
    Jiang, Yongtao
    ENGINEERING FAILURE ANALYSIS, 2021, 120 (120)
  • [39] Analysis of bond-slip between concrete and steel bar in fire
    Khalaf, Jamal
    Huang, Zhaohui
    Fan, Mizi
    COMPUTERS & STRUCTURES, 2016, 162 : 1 - 15
  • [40] Experimental study on bond-slip constitutive relation of SSSCFST columns
    Yu, Feng
    Fang, Yuan
    Niu, Kang
    Zhang, Yang
    Chen, Taiyao
    STRUCTURAL CONCRETE, 2021, 22 (04) : 2338 - 2357