Evaluating the slurry erosion rates of uniaxially stressed stainless steel 304

被引：0

作者：

Venkatraman Krishnan A. ^{[1
]}

Lim C.Y.H. ^{[2
]}

机构：

[1] Department of Mechanical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, Chennai

[2] Department of Mechanical Engineering, National University of Singapore, Singapore

来源：

Materials Today: Proceedings | 2023年 / 72卷

关键词：

Erosion; Mechanism; Slurry; Stainless steel; Taguchi Method; Wear;

D O I：

10.1016/j.matpr.2022.09.201

中图分类号：

学科分类号：

摘要：

Erosion enormously affects the chemical processing industry and the oil and gas industry. Particulates in the stream of flow cause material loss to the tune of millions of dollars. Parameters that are known to affect erosion include particle size, impact angle and velocity. However, very few have studied the effects of the stress state of the target on erosion rates. This paper studies the erosion rates of stainless steel 304 under the effects of a uniaxial stress from an external tensile load. Loads up to 70% of yield strength (YS) were applied and erosion rates were determined from the weight loss of the samples. The Taguchi method was used to analyze the influence of each parameter on the erosion rates. Results show that velocity and particle size enormously affect erosion rates followed by angle of impact. Stress state of the target showed no significant effects on erosion rates. © 2022

引用

页码：2221 / 2224

页数：3

共 21 条

[1]

Padhy M.K., Saini R.P., Study of silt erosion on performance of a Pelton turbine, Energy, 36, 1, pp. 141-147, (2011)

[2]

Chattopadhyay R., High silt wear of hydroturbine runners, Wear, 162-164, pp. 1040-1044, (1993)

[3]

Finnie I., Erosion of surfaces by solid particles, Wear, 3, 2, pp. 87-103, (1960)

[4]

Finnie I., Some reflections on the past and future of erosion, Wear, 186-187, pp. 1-10, (1995)

[5]

Bellman R., Levy A., Erosion mechanism in ductile metals, Wear, 70, 1, pp. 1-27, (1981)

[6]

Liebhard M., Levy A., The effect of erodent particle characteristics on the erosion of metals, wear 151, Wear, 151, 2, pp. 381-390, (1991)

[7]

Morrison C.T., Scattergood R.O., Routbort J.L., Erosion of 304 stainless steel, Wear, 111, 1, pp. 1-13, (1986)

[8]

Foley T., Levy A., The erosion of heat-treated steels, Wear, 91, 1, pp. 45-64, (1983)

[9]

Goretta K.C., Arroyo R.C., Wu C.-T., Routbort J.L., Erosion of work-hardened copper, nickel, and 304 stainless steel, Wear, 147, 1, pp. 145-154, (1991)

[10]

Sheldon G.L., Kanhere A., An investigation of impingement erosion using single particles, Wear, 21, 1, pp. 195-209, (1972)

← 1 2 3 →