A comparative study of electric current-assisted and conventional sintering of Inconel 718 superalloy

被引:0
|
作者
Ergin, Nuri [1 ]
Kocak, Necati [1 ]
Ozdemir, Ozkan [1 ]
机构
[1] Sakarya Univ Appl Sci, Fac Technol, Dept Met & Mat Engn, TR-54187 Sakarya, Turkiye
关键词
Superalloy; Sintering; Corrosion resistance; Electric current-assisted Sintering; Powder metallurgy; MECHANICAL-PROPERTIES; OXIDATION BEHAVIOR; HEAT-TREATMENT; HOT CORROSION; MICROSTRUCTURE; NI; EVOLUTION; COATINGS; PHASES;
D O I
10.1007/s10973-024-13008-8
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this study, In718 powder mixtures prepared from elemental powders following stoichiometric composition and supplied as a commercial product were produced by conventional powder metallurgy (1300 degrees C/4 h) and electric current-assisted sintering (ECAS)(1700-2300A/10 min) methods and followed by a double-aging heat treatment. The characterization studies determined that the best results were the sample produced by the ECAS method using the elemental powder mixture. The targeted precipitate gamma ', gamma '', and delta phases were obtained after the heat treatment, and a hardness value of 344 +/- 41 HV0.5 and a relative density of 98.96% were achieved. The sample preserved its surface integrity by exhibiting high corrosion resistance from hot corrosion studies in the temperature range of 650-850 degrees C and NaSO4 + 60%V2O5 environment. The corrosion rate of the sample, which was subjected to electrochemical corrosion tests in 3.5% NaCl and 10% NaNO3 solutions, was determined as 45.59 mpy and 10.56 mpy, respectively.
引用
收藏
页码:4367 / 4384
页数:18
相关论文
共 50 条
  • [31] Low cycle fatigue behaviour of modified and conventional superalloy Inconel 718 at 650°C
    E. Hari Krishna
    Kartik Prasad
    Vikas Kumar
    Vakil Singh
    Transactions of the Indian Institute of Metals, 2010, 63 : 63 - 66
  • [32] Ceramic Material Processing Towards Future Space Habitat: Electric Current-Assisted Sintering of Lunar Regolith Simulant
    Phuah, Xin Li
    Wang, Han
    Zhang, Bruce
    Cho, Jaehun
    Zhang, Xinghang
    Wang, Haiyan
    MATERIALS, 2020, 13 (18)
  • [33] Homogeneous TiB2 ceramics achieved by electric current-assisted self-propagating reaction sintering
    Salamon, David
    Eriksson, Mirva
    Nygren, Mats
    Shen, Zhijian
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (10) : 3303 - 3306
  • [34] Synthesis, characterization and properties of intensified plasma-assisted nitrided superalloy Inconel 718
    Singh, Varshni
    Meletis, Efstathios I.
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4): : 1093 - 1101
  • [35] A comparative study between internal spray cooling and conventional external cooling in drilling of Inconel 718
    Qin, Xuda
    Liu, Wentao
    Li, Shipeng
    Tong, Wei
    Ji, Xiaolai
    Meng, Fanjun
    Liu, Jianghong
    Zhao, Erhua
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (9-12): : 4581 - 4592
  • [36] A comparative study between internal spray cooling and conventional external cooling in drilling of Inconel 718
    Xuda Qin
    Wentao Liu
    Shipeng Li
    Wei Tong
    Xiaolai Ji
    Fanjun Meng
    Jianghong Liu
    Erhua Zhao
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 4581 - 4592
  • [37] A STUDY OF BACK STRESS DURING CREEP DEFORMATION OF A SUPERALLOY INCONEL 718
    HAN, YF
    CHATURVEDI, MC
    MATERIALS SCIENCE AND ENGINEERING, 1987, 85 (1-2): : 59 - 65
  • [38] Experimental study of micromilling selective laser melted Inconel 718 superalloy
    Sadiq, Muhammed A.
    Hoang, Nghi M.
    Valencia, Nicholas
    Obeidat, Suleiman
    Hung, Wayne N. P.
    46TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 46, 2018, 26 : 983 - 992
  • [39] A Study on the Parameters in High-Speed Turning of Superalloy Inconel 718
    Thakur, D. G.
    Ramamoorthy, B.
    Vijayaraghavan, L.
    MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (04) : 497 - 503
  • [40] Magnetic Field Generated during Electric Current-Assisted Sintering: From Health and Safety Issues to Lorentz Force Effects
    Deng, Huaijiu
    Dong, Jian
    Boi, Filippo
    Saunders, Theo
    Hu, Chunfeng
    Grasso, Salvatore
    METALS, 2020, 10 (12) : 1 - 16