Optimal Selection of Matte Grade in Copper Smelting Process

被引：1

作者：

Ahmed, Hussain ^{[1
]}

Vilkko, Matti ^{[1
]}

机构：

[1] Tampere Univ, Automat Technol & Mech Engn, Tampere 33720, Finland

来源：

IFAC PAPERSONLINE | 2023年 / 56卷 / 02期

关键词：

Process optimization; Maintenance scheduling and production planning; Applications in advanced materials manufacturing; OPTIMIZATION;

D O I：

10.1016/j.ifacol.2023.10.1353

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

This work presents the sensitivity analysis of a hierarchical scheduling framework for the copper smelting process with respect to the change in matte grade. The aim is to find the matte grade that can maximize the throughput of the copper smelting process. This study considers multiple-PSC units and a multiple-batch hierarchical scheduling framework that finds an optimal schedule for the process using promising heuristics. The process is briefly discussed, and the simulation results are discussed in detail to provide a comprehensive view of the effects of the matte grade on the operation of the copper smelting process. Copyright (c) 2023 The Authors.

引用

页码：2638 / 2643

页数：6

共 50 条

[31] On Selection of Optimal Classifiers
Rado, Omesaad
Neagu, Daniel
ARTIFICIAL INTELLIGENCE XXXVI, 2019, 11927 : 494 - 499
[32] Microwave-Leaching of Copper Smelting Dust for Cu and Zn Extraction
Sabzezari, Behrouz
Koleini, Seyed Mohammad Javad
Ghassa, Sina
Shahbazi, Behzad
Chelgani, Saeed Chehreh
MATERIALS, 2019, 12 (11)
[33] Hybrid method for selection of the optimal process of leachate treatment in waste treatment and valorization plants or landfills
Martin-Utrillas, Manuel
Reyes-Medina, Manuel
Curiel-Esparza, Jorge
Canto-Perello, Julian
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2015, 17 (04) : 873 - 885
[34] Optimal selection of control structure using a steady-state inversely controlled process model
Sharifzadeh, Mahdi
Thornhill, Nina F.
COMPUTERS & CHEMICAL ENGINEERING, 2012, 38 : 126 - 138
[35] Automating the Optimal Selection Process of Subassembly Sections of a Modular Spreader Beam Used in Lifting Operations
Wheatley, Tom
Chong, Perk Lin
Habibi, Hossein
Djawad, Wan
MACHINES, 2022, 10 (09)
[36] Optimal process selection for natural gas liquids recovery: Energy, exergy, economic, and environmental perspectives
Islam, Muhammad
Al-Sobhi, Saad A.
Naquash, Ahmad
Qyyum, Muhammad Abdul
Lee, Moonyong
ENERGY, 2024, 289
[37] Sensitivity Analysis of Optimal Operation of an Activated Sludge Process Model for Economic Controlled Variable Selection
de Araujo, Antonio C. B.
Gallani, Simone
Mulas, Michela
Skogestad, Sigurd
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (29) : 9908 - 9921
[38] A comprehensive setting method for the optimal setpoint of controlled variables in the zinc smelting solution purification process under multi-variation inlet status
Zhang, Xulong
Li, Yonggang
Luo, Yanting
Sun, Bei
Yang, Chunhua
CHEMICAL ENGINEERING SCIENCE, 2024, 297
[39] Modeling and optimizing bacterial leaching process parameters to increase copper extraction from a low-grade ore
Moghaddam, M. Yaghobi
Ranjbar, M.
Manafi, Z.
Schaffie, M.
Jahani, M.
MINERALS ENGINEERING, 2012, 32 : 5 - 7
[40] Physical chemistry of copper smelting slags and copper losses at the Paipote smelter Part 1-Thermodynamic modelling
Cardona, N.
Coursol, P.
Mackey, P. J.
Parra, R.
CANADIAN METALLURGICAL QUARTERLY, 2011, 50 (04) : 318 - 329

← 1 2 3 4 5 →