Structural acoustics analysis of automobile parts by using finite element method

被引：1
|
作者：
Ajay Didolkar A. [1 ]
Aniket Dhavale S. [1 ]
Kothavale B. [1 ]
机构：
[1] School of Mechanical Engineering, Dr. Vishwanath Karad MIT World Peace University Pune, 411038, MS
来源：
Materials Today: Proceedings | 2023年 / 72卷
关键词：
Acoustic-structure interaction; Electric motor; Finite elements; Modal Analysis; Vibration;
D O I：
10.1016/j.matpr.2022.09.302
中图分类号：
学科分类号：
摘要：
A modal analysis of the electric motor automotive component is presented in this study. The frequency responses for the rotor component of the electric motor were computed using finite element method. Comparison of the stator and rotor components of the electric motor's overall deformation frequency findings from modal analysis is done. CATIA V5 is used as a tool to design the electric motor parts; it also helped in making complicated parts easier to assemble. The electric motor is discredited using ANSA, which transforms the domain into a mesh and instantly displays the failure element. The numerical approach is used to calculate modal vibrations. Rigid body and natural frequencies are computed and displayed in different modes to avoid resonance. The ANSYS finite element (FE) code is used to investigate the system. © 2022
引用
收藏
页码：1297 / 1301
页数：4
相关论文
共 50 条
  • [41] Structural Reliability Analysis Using Stochastic Finite Element Method Based on Krylov Subspace
    Huang, Jianyun
    Yang, Qiuwei
    Cao, Hongfei
    Ma, Jiwei
    ALGORITHMS, 2024, 17 (10)
  • [42] Impact Failure Analysis of Reinforced Concrete Structural Components by Using Finite Element Method
    Murthy, A. Ramachandra
    Palani, G. S.
    Iyer, Nagesh R.
    Gopinath, Smitha
    Kumar, V. Ramesh
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2012, 86 (05): : 409 - 434
  • [43] Analysis of the structural behavior of the pelvis during lateral impact using the finite element method
    Dawson, JM
    Khmelniker, BV
    McAndrew, MP
    ACCIDENT ANALYSIS AND PREVENTION, 1999, 31 (1-2): : 109 - 119
  • [44] OPTIMUM SCALING OF THE SLS METAL PARTS USING FINITE ELEMENT ANALYSIS
    Pacurar, Razvan
    Balc, Nicolae
    Ros, Olimpia
    MODTECH 2010: NEW FACE OF TMCR, PROCEEDINGS, 2010, : 439 - 442
  • [45] The Simulation and Analysis of the Automobile Wheel Hub Strength Test Based on the Finite Element Method
    Liu, Shufen
    Li, Weimin
    Wang, Tianjun
    Xing, Ying
    NANOTECHNOLOGY AND PRECISION ENGINEERING, PTS 1 AND 2, 2013, 662 : 661 - 665
  • [46] ELASTO-PLASTIC ANALYSIS OF AUTOMOBILE BODY STRUCTURE BY THE FINITE ELEMENT METHOD.
    Kirioka, K.
    Hotta, Y.
    Saji, H.
    Bulletin of JSAE (Society of Automotive Engineers of Japan), 1974, (06): : 102 - 113
  • [47] Optimization of the Warpage of Fused Deposition Modeling Parts Using Finite Element Method
    Syrlybayev, Daniyar
    Zharylkassyn, Beibit
    Seisekulova, Aidana
    Perveen, Asma
    Talamona, Didier
    POLYMERS, 2021, 13 (21)
  • [48] DISCRETE HOMOGENIZATION OF FUSED DEPOSITION MODELING PARTS USING THE FINITE ELEMENT METHOD
    Ravindrababu, Suraj
    Makam, Raama
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 589 - 594
  • [49] AN ENERGY DIFFUSION MODEL FOR INTERIOR ACOUSTICS WITH STRUCTURAL COUPLING USING THE BOUNDARY ELEMENT METHOD
    Corcoran, Joseph M.
    Burdisso, Ricardo A.
    PROCEEDINGS OF THE ASME NOISE CONTROL AND ACOUSTICS DIVISION CONFERENCE (NCAD 2012), 2013, : 319 - 329
  • [50] Structural Modification and Evaluation Using Finite Element Reconciliation Method
    Shah, M. A. S. Aziz
    Yunus, M. A.
    Rani, M. N. Abdul
    Ayub, M. A.
    Sani, M. S. M.
    Saman, A. M.
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION GREEN ENERGY VEHICLE (AIGEV 2018), 2019, 2059
12345