Corrosion Behavior of Various High-temperature Materials in Supercritical Carbon Dioxide

被引：0
|
作者：
Xiao B. [1 ]
Li K. [1 ]
Wang B. [1 ]
Zhu Z. [1 ]
Zhang N. [1 ]
机构：
[1] School of Energy Power and Mechanical Engineering, North China Electric Power University, Changping District, Beijing
来源：
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2023年 / 43卷 / 11期
基金：
中国国家自然科学基金;
关键词：
austenitic heat-resistant steel; carburization; corrosion; ferritic heat-resistant steel; nickel base alloy; supercritical carbon dioxide;
D O I：
10.13334/j.0258-8013.pcsee.222176
中图分类号：
学科分类号：
摘要：
Supercritical carbon dioxide Brayton cycle power generation is a new power generation technology. Moreover, ensuring the corrosion resistance of high-temperature materials is a prerequisite for the operation safety of the equipment. The corrosion behaviors of three alloys P92, Sanicro25, and Inconel625 in 25MPa supercritical carbon dioxide at 600℃ are investigated in this paper. The results are characterized by scanning electron microscope, energy spectrum analysis, X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscope, and glow-discharge optical emission spectrometry. The results show that P92 forms a loose and porous oxide scale, while Sanicro25 and Inconel625 form a dense Cr2O3 oxide film. P92 has evident oxide pore formation and carburizing, while Sanicro25 and Inconel625 have Cr depletion. The corrosion resistance and carburizing resistance of Sanicro25 and Inconel625 are significantly better than those of P92. Based on the mechanism of void-induced duplex oxide formation, it is pointed out that the content of Cr is the key to preventing carburizing and ensuring the protective of the oxide scale. The results can provide some reference for material selection and corrosion protection of supercritical carbon dioxide cycle units. ©2023 Chin.Soc.for Elec.Eng.
引用
收藏
页码：4198 / 4206
页数：8
相关论文
共 34 条
  • [31] CHEN Hongsheng, WANG Haibo, SUN Qingzhu, Oxidation behavior of Fe-20Cr-25Ni-Nb austenitic stainless steel in high-temperature environment with small amount of water vapor[J], Corrosion Science, 145, pp. 90-99, (2018)
  • [32] NGUYEN T D, ZHANG J Q, YOUNG D J．, Growth of Cr<sub>2</sub>O<sub>3</sub> blades during alloy scaling in wet CO<sub>2</sub> gas [J], Corrosion Science, 133, pp. 432-442, (2018)
  • [33] ROUILLARD F, MOINE G, TABARANT M, Corrosion of 9Cr Steel in CO<sub>2</sub> at intermediate temperature II：mechanism of carburization[J], Oxidation of Metals, 77, 1-2, pp. 57-70, (2012)
  • [34] Kaiyang LI, ZENG Yimin, LUO Jingli, Corrosion of SS310 and alloy 740 in high temperature supercritical CO<sub>2</sub> with impurities H<sub>2</sub>O and O<sub>2</sub>[J], Corrosion Science, 184, (2021)
1234