Effect of Multidirectional Forging on the Microstructure Evolution and Mechanical Properties of Mg-2Sn-2Zn-0.7Mn-0.5Ca Alloys

被引：0

作者：

Lu, Taiyu ^{[1
]}

Yu, Yandong ^{[1
]}

Yan, Zehua ^{[2
]}

Quan, Liwei ^{[3
]}

Zhou, Hao ^{[4
]}

机构：

[1] Harbin Univ Sci & Technol, Sch Mat Sci & Chem Engn, Harbin 150040, Peoples R China

[2] Harbin Univ Sci & Technol, Rongcheng Coll, Weihai 264300, Peoples R China

[3] Hebei Univ Technol, Sch Mat Sci & Engn, Tianjin 300401, Peoples R China

[4] Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nanjing 210094, Peoples R China

来源：

JOM | 2024年 / 76卷 / 09期

关键词：

HALL-PETCH RELATIONSHIP; MAGNESIUM ALLOY; GRAIN-REFINEMENT; PART I; TEXTURE; SIZE; ANISOTROPY; ZN;

D O I：

10.1007/s11837-024-06757-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The Mg-2Sn-2Zn-0.7Mn-0.5Ca (wt.%) alloy was employed to investigate the effect of forging passes on both microstructural and mechanical properties as well as the mechanism of multidirectional forging (MDF). The results show that with the increase of MDF passes, the second phase is fragmented and dispersed. At the same time, the alloy's microstructure exhibits necklace-like microstructures with different thicknesses due to the generation of recrystallized grains. After the alloys are deformed by the first forging pass (MDF-1) and the third forging pass (MDF-3), both the strength and plasticity tend to increase. The strength of MDF-3 passes is the highest (230 MPa), while the elongation is improved in the fifth forging pass (MDF-5) deformed alloy with a concomitant decrease in tensile strength by 11 MPa. This phenomenon occurred because, after the alloy undergoes MDF-5 deformation, the texture changes from a typical basal texture to a bimodal texture. In other words, following MDF treatment, grain refinement and texture weakening together affect the mechanical properties of the alloys.

引用

页码：5470 / 5482

页数：13

共 41 条

[1]

Abhishek K., 2023, MATER TODAY-PROC, DOI [10.1016/j.matpr.2023.03.448, DOI 10.1016/J.MATPR.2023.03.448]

[2] Estimation of micro-Hall-Petch coefficients for prismatic slip system in Mg-4Al as a function of grain boundary parameters [J].

Andani, Mohsen Taheri ;

Lakshmanan, Aaditya ;

Sundararaghavan, Veera ;

Allison, John ;

Misra, Amit .

ACTA MATERIALIA, 2022, 226

[3]

Astakhov V.P., 2022, MECH IND ENG HIST AS, P39, DOI DOI 10.1007/978-3-030-90487-6_2

[4] The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP [J].

Balogh, Levente ;

Figueiredo, Roberto B. ;

Ungar, Tamas ;

Langdon, Terence G. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (01) :533-538

[5] Twinning and the ductility of magnesium alloys Part I: "Tension" twins [J].

Barnett, M. R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 464 (1-2) :1-7

[6] Effect mechanism of texture orientation on mechanical properties and Hall-Petch relationship of CVCDE AZ31 magnesium alloy via crystal plastic finite element method (CPFEM) [J].

Bian, Nan ;

Li, Feng ;

Du, Huaqiu ;

Niu, Wentao ;

Chen, Ziyu .

JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 923

[7]

Castelino Melwyn Rajesh, 2023, Materials Today: Proceedings, V92, P371, DOI 10.1016/j.matpr.2023.05.178

[8] The effect of processing parameters on the microstructure and texture evolution of a cup-shaped AZ80 Mg alloy sample manufactured by the rotating backward extrusion [J].

Che, Xin ;

Dong, Beibei ;

Wang, Qiang ;

Liu, Kai ;

Meng, Mu ;

Gao, Zhi ;

Ma, Jin ;

Yang, Fulai ;

Zhang, Zhiming .

JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 854

[9]

Ci WJ, 2023, J MATER RES TECHNOL, V26, P7502, DOI [10.1016/j.jmrt.2023.09.112, 10.1016/j.jmrt.2023.08.166]

[10] Comparison of the microstructure evolution and mechanical properties via MDF and ITMT methods [J].

Dong, Beibei ;

Che, Xin ;

Zhang, Zhimin ;

Yu, Jianmin ;

Meng, Mu .

JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 881

← 1 2 3 4 5 →