Reliability assessment of pressure vessel design methods

被引：0

作者：

Li H. ^{[1
]}

Yang P. ^{[1
]}

Huang X. ^{[2
]}

Yang H. ^{[1
]}

机构：

[1] Faculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou

[2] Southeast University, Nanjing

来源：

International Journal of Reliability and Safety | 2019年 / 13卷 / 1-2期

基金：

中国国家自然科学基金;

关键词：

LIMIT; Limit-load analysis method; Pressure vessel; Reliability; SCM; Stress categorisation method;

D O I：

10.1504/IJRS.2019.097014

中图分类号：

学科分类号：

摘要：

Several pressure vessel design methods based on elastic analysis and elastic-plastic analysis are available to designers. This paper proposes a reliability analysis method to assess three pressure vessel design methods: Stress Categorisation Method (SCM), Limit-Load Analysis (LIMIT) in ASME code and DBA-L method which was recently proposed by present authors. It was concluded that with the same input variables into the three analyses, the responses of calculated results of three method were different, which provided an effective guidance to assess and choose the proper design method in engineering practice. Copyright © 2019 Inderscience Enterprises Ltd.

引用

页码：31 / 43

页数：12

共 9 条

[1]

Rules for Construction of Pressure Vessels

[2]

Unfired Pressure Vessels Part 3 Design, (2014)

[3]

Eslami M.R., Shariyat M., Technique to distinguish the primary and secondary stress, ASME Journal Pressure Vessel Technology, 117, 3, pp. 197-203, (1995)

[4]

Fanous I.F., Seshadri R., Stress classification using the R-node method, ASME Journal Pressure Vessel Technology, 129, 4, pp. 676-682, (2007)

[5]

Gao B., Chen X., Shi X., Dong J., An approach to derive primary bending stress from finite element analysis for pressure vessels and applications in structural design, Journal of Pressure Vessel Technology, 132, 6, (2010)

[6]

Godbole P.B., Pore S., A new method for stress categorization on planes, ASME Journal Pressure Vessel Technology, 132, 6, (2010)

[7]

Labbe P.B., Categorization of seismically-induced stresses for civil and mechanical engineering, Nuclear Engineering and Design, 255, pp. 240-247, (2013)

[8]

Li H., Huang X., Yang P., Yang H., A new pressure vessel design by analysis method avoiding stress categorization, International Journal of Pressure Vessels & Piping, 152, pp. 38-45, (2017)

[9]

Lu M.W., Chen Y., Li J.G., Two-step approach of stress classification and primary structure method, ASME Journal Pressure Vessel Technology, 122, pp. 2-8, (2000)

← 1 →