Multi-physical Field Coupling Simulation and Verification of Tri-post Insulator on Environment-friendly 1 100 kV GIL

被引：0
|
作者：
Gao L. [1 ]
Jia Y. [1 ]
Ji S. [1 ]
Cheng Y. [2 ]
Li X. [2 ]
Li Z. [3 ]
机构：
[1] State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an
[2] Xi'an Xidian Switch Electric Co., Ltd., Xi'an
[3] China Electric Power Research Institute, Beijing
来源：
Gaodianya Jishu/High Voltage Engineering | 2020年 / 46卷 / 03期
基金：
国家重点研发计划;
关键词：
C[!sub]4[!/sub]F[!sub]7[!/sub]N/CO[!sub]2[!/sub; Environment-friendly GIL; Magnetocaloric fluid coupling; Thermoelectric coupling; Tri-post insulator;
D O I：
10.13336/j.1003-6520.hve.20190410033
中图分类号：
学科分类号：
摘要：
In order to develop tri-post insulators for environmental-friendly 1 100 kV gas-insulated transmission line (GIL), a complete multi-physical field coupling simulation model is established based on the existing structure of tri-post insulator on UHV GIL in accordance with the difference between environmental-friendly gas and traditional SF6 gas in terms of insulation strength and heat dissipation capacity. The temperature distribution of tri-post insulators on GIL under rated current is obtained by magnetic-thermal-fluid coupling simulation. After the influence of temperature on the dielectric constant of epoxy resin is taken into account, the electric field distribution of tri-post insulator is calculated, and the electric field intensity of each key part is checked by referring to the reference value under SF6. The stress distribution of the tri-post insulator is obtained by simulating the stress of the tri-post insulator under transportation. The calculated results show that the overall temperature and stress distribution of the tri-post insulator meet the requirements and have an enough margin, while the surface of the tri-post insulator, especially the abdomen of the insulator, is the weak link of the insulation considering the temperature, and the maximum electric field strength reaches 12.44 kV/mm, which should be paid more attention to when it is applied on environmental-friendly GIL. © 2020, High Voltage Engineering Editorial Department of CEPRI. All right reserved.
引用
收藏
页码：987 / 995
页数：8
相关论文
共 17 条
  • [1] Yan X., Gao K., Zheng Y., Et al., Progress of gas mixture and alternative gas of SF<sub>6</sub> , Power System Technology, 42, 6, pp. 1837-1844, (2018)
  • [2] Gao K., Yan X., Wang H., Et al., Progress in environment-friendly gas-insulated transmission line (GIL), High Voltage Engineering, 44, 10, pp. 3105-3113, (2018)
  • [3] Zhou H., Ma G., Liu S., Et al., Study on surface charges accumulation on insulator and its effects on the surface electrical field in DC-GIL with electro-thermal coupling model, Proceedings of the CSEE, 37, 4, pp. 321-330, (2017)
  • [4] Xue J., Wang H., Wang Y., Et al., Accumulation and decay characteristics of surface charges on epoxy composite insulation SF<sub>6</sub> under DC voltage, High Voltage Engineering, 44, 12, pp. 3824-3832, (2018)
  • [5] Qi B., Gao C., Zhao L., Et al., Influence of surface charge on flashover voltage of gas insulated substation basin insulator under AC and DC voltage, High Voltage Engineering, 43, 3, pp. 915-922, (2017)
  • [6] Li P., Li Z., Sun Q., Et al., Research on insulation design of UHV gas-insulated metal-enclosed transmission line, Power System Technology, 39, 11, pp. 3305-3312, (2015)
  • [7] Chen Y., Cui B., Wang N., Et al., Structural design of central insert in basin-type insulator used for 1100 kV GIS, High Voltage Engineering, 42, 2, pp. 564-570, (2016)
  • [8] Wang H., Guo Z., Zhang S., Et al., Influence of UHV AC GIS spacer' defects on electrical field distribution, High Voltage Engineering, 44, 3, pp. 982-992, (2018)
  • [9] Lu J., Zhou Z., Cao W., The structure study of three columns support insulator with GIL, Machinery Design & Manufacture, 9, pp. 52-55, (2015)
  • [10] Wang J., Xie W., Gong R., Et al., Design of 550 kV GIL three post insulator, High Voltage Apparatus, 54, 5, pp. 114-118, (2018)
12