Constitutive Modelling of Laser Based Powder Bed Fusion Melted Inconel 718 Superalloy over a Wide Range of Strain Rates

被引：1
作者：
Delcuse, Laura [1 ]
Bahi, Slim [1 ]
Gunputh, Urvashi [2 ]
Wood, Paul [2 ]
Rusinek, Alexis [1 ]
机构：
[1] UMR CNRS 7239, Lab Microstruct Studies & Mech Mat, 7 Rue Felix Savart, F-57000 Metz, France
[2] Univ Derby, IISE, Quaker Way, Derby, England
来源：
ADVANCES IN MANUFACTURING TECHNOLOGY XXXIV | 2021年 / 15卷
关键词：
Powder Bed Fusion; Inconel; 718; Constitutive model; MECHANICAL-PROPERTIES; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.3233/ATDE210036
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this paper is to determine the material parameters of the Inconel 718 manufactured by Laser Powder Bed Fusion, using the Johnson-Cook model. Different compression tests in quasi-static and dynamic domains were performed under various strain rates, in range of 10(-3) s(-1) to 2500 s(-1) at the room temperature. The difference between the two building directions XY and ZX, horizontal and vertical position from the substrate, was investigated to highlight the influence of the process parameter on the bulk material behavior. Finally, the identified parameters were implemented into a numerical model, describing the behavior of auxetic structure under compression test, and validated using experimental data.
引用
收藏
页码：198 / 203
页数：6
相关论文
共 6 条
  • [1] Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy
    Delcuse, L.
    Bahi, S.
    Gunputh, U.
    Rusinek, A.
    Wood, P.
    Miguelez, M. H.
    [J]. ADDITIVE MANUFACTURING, 2020, 36
  • [2] Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
    Deng, Dunyong
    Peng, Ru Lin
    Brodin, Hakan
    Moverare, Johan
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 713 : 294 - 306
  • [3] Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment
    Iturbe, A.
    Giraud, E.
    Hormaetxe, E.
    Garay, A.
    Germain, G.
    Ostolaza, K.
    Arrazola, P. J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 441 - 453
  • [4] Trosch T., 2016, 164 laser melted Inconel 718 compared to forging and casting, P428
  • [5] Dynamic behavior and a modified Johnson-Cook constitutive model of Inconel 718 at high strain rate and elevated temperature
    Wang, Xiangyu
    Huang, Chuanzhen
    Zou, Bin
    Liu, Hanlian
    Zhu, Hongtao
    Wang, Jun
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 580 : 385 - 390
  • [6] Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting
    Yi, J. H.
    Kang, J. W.
    Wang, T. J.
    Wang, X.
    Hu, Y. Y.
    Feng, T.
    Feng, Y. L.
    Wu, P. Y.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 786 : 481 - 488
1