Real-Time Dispatch Model for Power System with Advanced Adiabatic Compressed Air Energy Storage

被引：0

作者：

Li Y. ^{[1
]}

Miao S. ^{[1
]}

Yin B. ^{[1
]}

Luo X. ^{[1
,2
]}

Wang J. ^{[1
,2
]}

机构：

[1] State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Hubei Electric Power Security and High Efficiency Key Laboratory, School of Electrical and Electronic Engineering, Wuhan

[2] School of Engineering, Warwick University, Coventry

来源：

Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2019年 / 34卷 / 02期

关键词：

Advanced adiabatic compressed air energy storage (AA-CAES); Automatic generation control (AGC); Fuzzy chance constraints program; Real-time dispatch;

D O I：

10.19595/j.cnki.1000-6753.tces.171720

中图分类号：

学科分类号：

摘要：

Advanced adiabatic compressed air energy storage (AA-CAES) has the merits of large-scale, low-costs, no fossil fuel, and high efficiency, etc. It is one of the mainstream development trends of the compressed air energy storage (CAES) technology. This paper took the AA-CAES as an important scheduling resource, to participate in power system real-time dispatch together with thermal power generators and a wind power plant. Firstly, based on the thermodynamic characteristics of the AA-CAES plant, the operation constraints of AA-CAES, which can reflect the AA-CAES operation characteristics under off-design conditions, were established. After that, the automatic generation control (AGC) constraints of the AA-CAES plant were established considering the power regulation uncertainty in the AGC stage. As a result, the real-time dispatch model for the power system with AA-CAES was established. In the model, the system AGC capacity demand, the AGC regulation rate demand and the AGC regulation task demand were considered. Finally, the simulation test was applied on the modified IEEE 30-bus system, which verified the dispatch model. © 2019, Electrical Technology Press Co. Ltd. All right reserved.

引用

页码：387 / 397

页数：10

共 25 条

[1]

Hu J., Yang S., Hou Z., Et al., Appli-cation states and inspirations of grid-scale energy storage techniques, Power System Technology, 39, 4, pp. 879-885, (2015)

[2]

Xu H., Li Y., Miao S., Et al., Optimization dispatch strategy considering renewable energy consumptive benefits based on "source-load-energy storage" coordination in power system, Power System Protection and Control, 45, 17, pp. 18-25, (2017)

[3]

Chen L., Zheng T., Mei S., Et al., Review and prospect of compressed air energy storage system, Journal of Modern Power Systems & Clean Energy, 4, 4, pp. 529-541, (2016)

[4]

Jakiel C., Zunft S., Nowi A., Adiabatic compressed air energy storage plants for efficient peak load power supply from wind energy: the European project AA-CAES, International Journal of Energy Technology & Policy, 5, 3, pp. 296-306, (2007)

[5]

Luo X., Wang J., Krupke C., Et al., Modelling study, efficiency analysis and optimisation of large-scale adiabatic compressed air energy storage systems with low-temperature thermal storage, Applied Energy, 162, pp. 589-600, (2016)

[6]

Yan Y., Zhang C., Li K., Et al., An active control strategy for composited energy storage with compressed air energy storage in microgrid, Transactions of China Electrotechnical Society, 32, 20, pp. 231-240, (2017)

[7]

Wang J., Lu K., Ma L., Et al., Overview of compressed air energy storage and technology development, Energies, 991, 10, pp. 1-22, (2017)

[8]

Daneshi H., Srivastava A.K., Security-constrained unit commitment with wind generation and compressed air energy storage, IET Generation Transmission & Distribution, 6, 2, pp. 167-175, (2012)

[9]

Abbaspour M., Satkin M., Mohammadi-Ivatloo B., Et al., Optimal operation scheduling of wind power integrated with compressed air energy storage (CAES), Renewable Energy, 51, 51, pp. 53-59, (2013)

[10]

Ghalelou A., Fakhri A., Nojavan S., Et al., A stochastic self-scheduling program for compressed air energy storage (CAES) of renewable energy sources (RESs) based on a demand response mechanism, Energy Conversion & Management, 120, pp. 388-396, (2016)

← 1 2 3 →