Microstructure, wear and corrosion resistance of (CrFeNiAl)100–xMox high-entropy alloy coatings by laser cladding

被引：0
作者：
Zhao X. [1 ]
Cui H. [1 ,2 ]
Jiang D. [1 ]
Song X. [1 ]
机构：
[1] School of Materials Science and Engineering, Shandong University of Science and Technology, Qingdao
[2] School of Materials Science and Engineering, Ocean University of China, Qingdao
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2023年 / 40卷 / 11期
基金：
中国国家自然科学基金;
关键词：
corrosion resistance; hardness; high-entropy alloy coatings; laser cladding; wear resistance;
D O I：
10.13801/j.cnki.fhclxb.20230222.008
中图分类号：
学科分类号：
摘要：
For the corrosion and wear failure of materials used in the marine environment, the (CrFeNiAl)100–xMox high-entropy alloy coatings were prepared on 304 stainless steel (304 ss) by laser cladding. The phase composition, microstructure, hardness, wear resistance and corrosion resistance of the coatings were analyzed. The results show that the coatings are composed of body-centered cubic (BCC)+B2 phases. With the increase of Mo, the content of B2 phase gradually increases, and nano scale B2 phase precipitates in the dendrite. The hardness of the coating increases with the increase of Mo content, the highest hardness reaches HV0.2 636.6, and the wear resistance increases gradually. The corrosion current density firstly decreases and then increases with the increase of Mo, indicating that the corrosion resistance of the coating firstly increases and then decreases in 3.5wt%NaCl solution. The results of immersion corrosion show that the coatings are selectively dissolved in the interdendritic region. The corrosion current density and passivation current density of (CrFeNiAl)92Mo8 coating are lower than 304 ss, and the corrosion resistance is the best with good wear resistance. Adding appropriate Mo element can improve the wear resistance and corrosion resistance of (CrFeNiAl)100–xMox coatings. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：6311 / 6323
页数：12
相关论文
共 45 条
  • [21] ALLIMANALAN A, BABU S P K, MUTHUKUMARAN S, Et al., Corrosion behaviour of thermally sprayed Mo added AlCoCrNi high entropy alloy coating[J], Materials Today: Proceedings, 27, pp. 2398-2400, (2020)
  • [22] SONG Pengfang, JIANG Fulin, WANG Yuling, Et al., Advances in the preparation of high entropy alloy coatings by laser cladding, Surface Technology, 50, 1, pp. 242-252, (2021)
  • [23] MA G, CUI H, JIANG D, Et al., The evolution of multi and hierarchical carbides and their collaborative wear-resisting effects in CoCrNi/WC composite coatings via laser cladding[J], Materials Today Communications, 30, (2022)
  • [24] LIU Fenjun, NING Xiang, BAI Yanxia, Et al., Microstructure and corrosion properties of laser cladding Al-TiC composite coating on AZ31 magnesium alloy[J], Acta Materiae Compositae Sinica, 40, 2, pp. 963-973, (2023)
  • [25] JOSEPH J, STANFORD N, HODGSON P, Et al., Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC Al<sub>x</sub>CoCrFeNi high entropy alloys[J], Journal of Alloys and Compounds, 726, pp. 885-895, (2017)
  • [26] NIU Z, WANG Y, GENG C, Et al., Microstructural evolution, mechanical and corrosion behaviors of as-annealed CoCrFeNiMo<sub>x</sub> (x = 0, 0.2, 0.5, 0.8, 1) high entropy alloys[J], Journal of Alloys and Compounds, 820, (2020)
  • [27] DONG Y, LU Y, KONG J, Et al., Microstructure and mechanical properties of multi-component AlCrFeNiMo<sub>x</sub> high-entropy alloys[J], Journal of Alloys and Compounds, 573, pp. 96-101, (2013)
  • [28] SHI X, WANG C, HUANG M, Et al., Microstructure and wear resistance property of AlFeCrNiMo<sub>x</sub> coatings by plasma cladding[J], Materials Research Express, 6, 10, (2019)
  • [29] LI Y, LIAW P K, ZHANG Y., Microstructures and properties of the low-density Al<sub>15</sub>Zr<sub>40</sub>Ti<sub>28</sub>Nb<sub>12</sub>M(Cr, Mo, Si)<sub>5</sub> high-entropy alloys[J], Metals, 12, 3, (2022)
  • [30] TAKEUCHI A, INOUE A., Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element[J], Materials Transactions, 46, 12, pp. 2817-2829, (2005)
12345