Dislocation densities in a low-carbon steel during martensite transformation determined by in situ high energy X-Ray diffraction

被引：0

作者：

Macchi J. ^{[1
]}

Gaudez S. ^{[1
]}

Geandier G. ^{[1
]}

Teixeira J. ^{[1
]}

Denis S. ^{[1
]}

Bonnet F. ^{[2
]}

Allain S.Y.P. ^{[1
]}

机构：

[1] Institut Jean Lamour, UMR 7198 CNRS Université de Lorraine, Campus ARTEM Nancy

[2] ArcelorMittal Research SA, APRC, Voie Romaine, BP 30320, Maizières les Metz

来源：

Materials Science and Engineering: A | 2021年 / 800卷

关键词：

Dislocation; Martensite; Mechanical behavior; Steel; Synchrotron; X-ray analysis;

D O I：

10.1016/j.msea.2020.140249

中图分类号：

学科分类号：

摘要：

The evolution of the dislocation densities in martensite and in austenite during the quench of a low-carbon (0.215 wt% C) steel is investigated in situ by the mean of a High Energy X-Ray Diffraction experiment on a synchrotron beamline. The line configuration offers an excellent time resolution well adapted to the studied martensitic transformation kinetics. The mean density of dislocations in martensite increases as the transformation proceeds confirming that dislocations are not homogeneously distributed between the laths in agreement with some recent post-mortem observations. The resulting spatial distribution of dislocations and the associated strain-hardening support the views assuming that lath martensite is a heterogeneous microstructure and behaves as a “multiphase” aggregate. In austenite, the increase in dislocation densities is even more significant meaning that austenite in martensite is also a hard phase, contradicting some recent theories attributing to films of retained austenite a major role in the plasticity of martensite. © 2020 Elsevier B.V.

引用

共 49 条

[1]

Fonstein N., ADVANCED HIGH STRENGTH SHEET STEELS : Physical Metallurgy, Design, Processing, and Properties, (2016)

[2]

Allain S., Bouaziz O., Takahashi M., Toward a new interpretation of the mechanical behaviour of as-quenched low alloyed martensitic steels, ISIJ Int., 52, pp. 717-722, (2012)

[3]

Ungar T., Harjo S., Kawasaki T., Tomota Y., Ribarik G., Shi Z., Composite behavior of lath martensite steels induced by plastic strain, a new paradigm for the elastic-plastic response of martensitic steels, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 48, pp. 159-167, (2017)

[4]

Hutchinson B., Bate P., Lindell D., Malik A., Barnett M., Lynch P., Plastic yielding in lath martensites – an alternative viewpoint, Acta Mater., 152, pp. 239-247, (2018)

[5]

Li J., Ohmura T., Tsuzaki K., Microstructure effect on nanohardness distribution for medium-carbon martensitic steel, Sci. China, Ser. E Technol. Sci., 49, pp. 10-19, (2006)

[6]

He B.B., Huang M.X., Revealing the intrinsic nanohardness of lath martensite in low carbon steel, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 46, pp. 688-694, (2015)

[7]

He B.B., Zhu K., Huang M.X., On the nanoindentation behaviour of complex ferritic phases, Phil. Mag. Lett., 94, 7, pp. 439-446, (2014)

[8]

Morsdorf L., Jeannin O., Barbier D., Mitsuhara M., Raabe D., Tasan C.C., Multiple mechanisms of lath martensite plasticity, Acta Mater., 121, pp. 202-214, (2016)

[9]

Morsdorf L., Tasan C.C., Ponge D., Raabe D., 3D structural and atomic-scale analysis of lath martensite: effect of the transformation sequence, Acta Mater., 95, pp. 366-377, (2015)

[10]

Badinier G., Effect of Carbon Segregation and Carbide Precipitation on the Mechanical Response of Martensite, (2013)

← 1 2 3 4 5 →