Laser welding of additively manufactured AlSi10Mg and conventionally manufactured Al6061 alloy

被引：2

作者：

Vishwakarma, A. K. ^{[1
,2
]}

Debnath, D. ^{[1
,2
]}

Pawar, M. D. ^{[1
]}

Muthiyan, V. ^{[3
]}

Gautam, B. ^{[4
]}

Khatirkar, R. ^{[5
]}

Shekhar, Himanshu ^{[2
]}

Hiwarkar, V. D. ^{[1
]}

机构：

[1] Minist Def, Dept Met & Mat Engn, DIAT DU, Pune, India

[2] HEMRL, Pune, Maharashtra, India

[3] COEP Technol Univ COEP Tech, Pune 411005, Maharashtra, India

[4] R&DE E, DRDO, Pune, India

[5] VNIT Nagpur, Pune, Maharashtra, India

来源：

WELDING IN THE WORLD | 2024年 / 68卷 / 07期

关键词：

AlSi10Mg; Additive manufacturing; Laser welding; Heat treatment; Microstructure; MECHANICAL-PROPERTIES; WELDABILITY;

D O I：

10.1007/s40194-024-01794-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the present study, laser welding of additively manufactured AlSi10Mg was undertaken with AlSi10Mg (similar) and Al6061 (dissimilar) alloy. The aim was to understand the laser weldability of selective laser melting (SLM)-printed AlSi10Mg alloy without filler material. The similar and dissimilar type of butt joints were prepared, and it is found that dissimilar weldments had better mechanical properties than similar weldments. The heat treatment on these welded plates also improved their mechanical properties. The precipitation of Mg2Si particles was evident from the XRD and TEM analysis. The as-built cellular structure was broken due to heat treatment and also near the weld zone in the as-welded plate. It was observed that microhardness increased with increase in Mg2Si content after the heat treatment process. The strength of welded samples was less than that of the base metals. The heat treatment results in similar to 20% increase in the tensile strength of the welded samples with significant increase in elongation.

引用

页码：1731 / 1745

页数：15

共 29 条

[1] 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting [J].

Aboulkhair, Nesma T. ;

Simonelli, Marco ;

Parry, Luke ;

Ashcroft, Ian ;

Tuck, Christopher ;

Hague, Richard .

PROGRESS IN MATERIALS SCIENCE, 2019, 106

[2]

[Anonymous], ROBOTS LASER WELDING

[3] Role of Mg2Si precipitates size in determining the ductility of A357 cast alloy [J].

Asghar, Ghulam ;

Peng, Liming ;

Fu, Penghuai ;

Yuan, Lingyang ;

Liu, Yue .

MATERIALS & DESIGN, 2020, 186

[4] Laser Weldability of AlSi10Mg Alloy Produced by Selective Laser Melting: Microstructure and Mechanical Behavior [J].

Biffi, Carlo Alberto ;

Fiocchi, Jacopo ;

Tuissi, Ausonio .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) :6714-6719

[5] Optimization of laser beam welding of steel parts made by additive manufacturing [J].

Caiazzo, Fabrizia ;

Alfieri, Vittorio .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 114 (9-10) :3123-3136

[6] Effect of ambient pressure on laser welding of AlSi10Mg fabricated by selected laser melting [J].

Chen, Nannan ;

Wan, Zixuan ;

Wang, Hui-Ping ;

Li, Jingjing ;

Yang, Baixuan ;

Solomon, Joshua ;

Carlson, Blair .

MATERIALS & DESIGN, 2022, 215

[7] Additive manufacturing in military and humanitarian missions: Advantages and challenges in the spare parts supply chain [J].

den Boer, Jelmar ;

Lambrechts, Wim ;

Krikke, Harold .

JOURNAL OF CLEANER PRODUCTION, 2020, 257

[8]

Emmelmann C, 2015, LASERS MANUFACTURING

[9]

Fulcher B.A., 2014, Proc. Solid Freeform Fabrication (SFF) Symposium, Austin, P404

[10] Microstructural investigation and mechanical behavior of a two-material component fabricated through selective laser melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg cast alloy substrate [J].

Hadadzadeh, Amir ;

Amirkhiz, Babak Shalchi ;

Shakerin, Sajad ;

Kelly, Josh ;

Li, Jian ;

Mohammadi, Mohsen .

ADDITIVE MANUFACTURING, 2020, 31

← 1 2 3 →