Heat transfer performance simulation of double-layer trapezoidal microchannel heat sink based on pyramidal turbulence structure

被引：0
|
作者：
Chen R. [1 ]
Tang S. [2 ]
机构：
[1] Office of Logistics & Infrastructure, Beijing Institute of Technology, Beijing
[2] Beijing THSYSTEM Technology Co., Ltd, Beijing
来源：
Huagong Jinzhan/Chemical Industry and Engineering Progress | 2020年 / 39卷 / S2期
关键词：
heat transfer; microchannels; model; numerical simulation; optimal design;
D O I：
10.16085/j.issn.1000-6613.2020-1101
中图分类号：
学科分类号：
摘要：
As the power of electronic device continues to increase, the heat flux density has also increased accordingly. Good thermal management is an important condition to ensure the safe and stable operation of electronic device. Based on the research results of Hosseinpour, et al and Sharma, et al, a double-layer microchannel heat sink with a pyramidal turbulence structure was designed, the heat transfer capacity of the microchannel heat sink is improved. Deionized water was selected as working medium flow, the double-layer trapezoidal microchannel heat sink model based on the pyramidal turbulence structure was established and analyzed by numerical simulation, the optimized structure size was obtained. The research shows that the microchannel heat sink has better heat transfer performance than other working conditions when the Reynolds number of the microchannel heat sink fluid is near 468, the distance between the disturbing structures is near 300μm, and the bottom-height ratio of the disturbing structure is near 0.6. Under the same conditions which Reynolds number is 800, compared with the results of Sharma, et al, the total heat resistance of the microchannel heat sink is reduced by 26%; compared with the ordinary double-layer trapezoidal microchannel heat sink, the double layer with pyramidal turbulence structure. The enhanced heat transfer coefficient PEC of the double-layer trapezoidal microchannel heat sink with pyramidal turbulence structure is 1.28. © 2020, Chemical Industry Press Co., Ltd.. All rights reserved.
引用
收藏
页码：19 / 25
页数：6
相关论文
共 16 条
  • [1] WANG Mingzhe, LI Mingzhong, TAN Jichun, Et al., Research on thermal effect in high power diode-end-pumped Nd YLF disk laser amplifier, Laser & Infrared, 4, pp. 322-325, (2007)
  • [2] TUCKERMAN D B, PEASE R F W., High-performance heat sinking for VLSI, IEEE Electron Device Letters, 2, 5, pp. 126-129, (1981)
  • [3] VAFAI K, ZHU L., Analysis of two-layered micro-channel heat sink concept in electronic cooling, International Journal of Heat and Mass Transfer, 42, 12, pp. 2287-2297, (1999)
  • [4] Ahmed HAMDI E, Ahmed MIRGHANI I, Optimum thermal design of triangular, trapezoidal and rectangular grooved microchannel heat sinks [J], International Communications in Heat and Mass Transfer, 66, pp. 47-57, (2015)
  • [5] WEI Zhuangzhuang, GAO Linsong, WANG Renche, Et al., Simulation and experimental research on heat transfer of metal microchannel heat-sink, Vacuum & Cryogenics, 26, 2, pp. 131-138, (2020)
  • [6] AL-NEAMA Ahmed F, KAPUR Nikil, SUMMERS Jonathan, Et al., An experimental and numerical investigation of the use of liquid flow in serpentine microchannels for microelectronics cooling, Applied Thermal Engineering, 116, pp. 709-723, (2017)
  • [7] YANG Xue, LU Kunpeng, TANG Xiaojun, Et al., Numerical simulation of the cooling capacity of heat sink with high heat flow density, Laser & Infrared, 48, 1, pp. 52-55, (2018)
  • [8] LEI C, GUO D X, HUA S W., Numerical study of laminar flow and heat transfer in microchannel heat sink with offset ribs on sidewalls, Applied Thermal Engineering, 92, pp. 32-41, (2016)
  • [9] GHANI Ihsan Ali, SIDIK Nor Azwadi Che, MAMAT Rizal, Heat transfer enhancement in microchannel heat sink using hybrid technique of ribs and secondary channels, International Journal of Heat and Mass Transfer, 114, pp. 640-655, (2017)
  • [10] AL-NEAMA Ahmed F, KHATIR Zinedine, KAPUR Nikil, Et al., An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks, International Journal of Heat and Mass Transfer, 120, pp. 1213-1228, (2018)
12