Numerical study of wall cooling effects on diesel spray combustion characteristics under different ambient conditions

The effects of wall cooling on diesel spray combustion characteristics and engine performance are varied under different environmental conditions and the reasons remain to be further analyzed. The systematic explanation of its influence laws can effectively help the cooling system design and fault isolation under changing working conditions. Therefore, the effect mechanism of wall temperature on the diesel spray combustion characteristics under different ambient temperature and pressure conditions is numerically revealed through the combination of CFD simulation and chemical reaction kinetics analysis. During the calculation model validation, the simulation results showed good agreement with the experimental results and good adaptability to the change in wall temperature. The results show that high ambient temperature and pressure lead to the acceleration of the reaction rate, and high pressure also slows down the fuel diffusion, which eventually causes the fuel to undergo more reaction processes before hitting the wall and being in the relatively late stage of the low-temperature reaction process. In the process of low-temperature reaction and heat accumulation, the effect of temperature drop in the late stage of the reaction is less than that in the early stage due to more heat accumulation before cooling. This ultimately leads to diesel ignition being delayed by low wall temperatures under low ambient temperature and pressure conditions, while diesel spray at high ambient temperatures and pressures has a stronger anti-interference ability to the wall temperature.