Effect of Laser Texturing Technology on Joint Properties of Ti to K9 Glass Diffusion Bonding

被引：0
|
作者：
Wang M. [1 ,2 ]
Chen M. [1 ,2 ]
Jiang J. [1 ,2 ]
Song X. [1 ,2 ]
Tang D. [3 ]
Cao J. [1 ,2 ]
机构：
[1] State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin
[2] Shandong Provincial Key Lab of Special Welding Technology, Harbin Institute of Technology at Weihai, Weihai
[3] School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 14期
关键词：
diffusion bonding; K9; glass; laser texturing; microstructure; Ti;
D O I：
10.3901/JME.2023.14.130
中图分类号：
学科分类号：
摘要：
For the problem that Ti and K9 glass are difficult to form an effective bonding due to the difference of chemical bonds, nanosecond laser texturing of Ti developed with which the diffusion bonding of Ti and K9 glass was achieved. The microstructure, phase composition, and mechanical properties of laser-textured Ti and Ti/K9 glass joint were characterized by optical microscope(OM), scanning electron microscope(SEM), X-ray diffractometer(XRD), and universal material testing machine. The results show that the interconnected networks were produced on the Ti surface after laser texturing, where melting and recrystallization occurred, with the formation of Ti-O and Ti-N compounds. With the increase of laser processing times, the content of Ti-N compounds was increased while the content of Ti-O compounds was decreased, and the shear strength of the joint increased first then decreased which indicates that the over-increased Ti-N compounds resulted in the decrease of the joint strength. The maximum shear strength of 13.1 MPa was obtained when the 15th laser processing was adopted. The energy dispersive scanning(EDS) analysis showed that chemical reaction and atomic diffusion among Ti, Si, and other elements between Ti and K9 glass at the bonding interface were detected. Laser texturing Ti is helpful to enhance the activity of elements, which helps promote elemental diffusion and chemical reaction. © 2023 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：130 / 137
页数：7
相关论文
共 28 条
  • [1] WANG Meirong, LEI Yuzhen, Et al., Effect of holding time on the interfacial microstructure and mechanical properties of K9 glass/B<sub>2</sub>O<sub>3</sub>-Bi<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub>/pure Ti brazing joints, Transactions of the China Welding Institution, 40, 1, pp. 80-83, (2019)
  • [2] WANG Zhen, CHENG Xuemin, Research progress and development trend of fast steering mirror[J], Journal of Applied Optics, 40, 3, pp. 373-379, (2019)
  • [3] BOROWITZ M., Strategic implications of the proliferation of space situational awareness technology and information：Lessons learned from the remote sensing sector[J], Space Policy, 47, 1, pp. 18-27, (2018)
  • [4] SANDERS K, MASRI S., The energy-water agriculture nexus: The past, present and future of holistic resource management via remote sensing technologies[J], Journal of Cleaner Production, 117, 1, pp. 73-88, (2016)
  • [5] BRAZ C, VENTURA C, OLIVEIRA M, Et al., Investigating the application of customized abrasive cutoff wheels with respect to tool wear and subsurface integrity in metallographic cutting of pure titanium[J], Metallography，Microstructure，and Analysis, 8, 6, pp. 826-832, (2019)
  • [6] MLGA B, Et al., Properties of hydrophobic carbon–PTFE composite coating with high corrosion resistance by facile preparation on pure Ti[J], Transactions of Nonferrous Metals Society of China, 29, 11, pp. 2321-2330, (2019)
  • [7] XU S Z, YAO C Z，, DOU H Q, Et al., An investigation on 800 nm femtosecond laser ablation of K9 glass in air and vacuum[J], Applied Surface Science, 406, 6, pp. 91-98, (2017)
  • [8] YANG C., Remote Sensing and precision agriculture technologies for crop disease detection and management with a practical application example[J], Engineering, 6, 5, pp. 528-532, (2020)
  • [9] ELREFAEY A, JANCZAK-RUSCH J, KOEBEL M M., Direct glass-to-metal joining by simultaneous anodic bonding and soldering with activated liquid tin solder[J], Journal of Materials Processing Technology, 214, 11, pp. 2716-2722, (2014)
  • [10] XU Xingwen, Experimental study, process optimization and numerical simulation of laser transmission welding of titanium alloy and glass, (2018)
123