Dumbbell shaped microstrip broadband antenna

被引：15
作者：
Baudha S. [1 ]
Garg H. [1 ]
Yadav M.V. [1 ]
机构：
[1] Department of Electrical and Electronics Engineering, Goa Campus, BITS Pilani
来源：
Journal of Microwaves, Optoelectronics and Electromagnetic Applications | 2019年 / 18卷 / 01期
关键词：
Broadband Antenna; Dumbbell shape; Fractional Bandwidth; Partial ground plane; Satellite communication;
D O I：
10.1590/2179-10742019v18i11371
中图分类号：
学科分类号：
摘要：
In this article, a dumbbell shaped microstrip broadband microstrip antenna with partial ground plane is presented, The overall dimension of the proposed antenna is 20 x 15 x 1.5 mm 3 and is fabricated on FR4 substrate which has electrical permittivity of 4.3 and loss tangent of 0.025. FR4 is a low cost and easily available. The thickness of the substrate is 1.5 mm. The impedance bandwidth of the proposed antenna is 151.11 % (3.48 GHz to 25 GHz). The peak gain and radiation efficiency of the proposed antenna are 4.5 dB and 68 % respectively in the operating frequency band. Due to introduction of rings on the edges of the octagon and cutting of circular slots with the rectangular slits in the ground plane the antenna starts resonating from 3.48 GHz to 25 GHz. Simulated results are in good agreement with the measured results. The proposed antenna covers partial frequency range for ultra-wide band applications, 3.5/5.5 GHz WiMAX band, 5.2/5.8 GHz WLAN band, 8/12 GHz X-band, 12/18 GHz Ku –band. It can be used in space and satellite communications etc. Curves of radiation pattern and S-parameter of both simulated and measured results are shown. The impedance curves, surface current, radiation efficiency, simulated return losses, gain, and radiation patterns of the proposed antenna are described in the paper. © 2019 SBMO/SBMag.
引用
收藏
页码：33 / 42
页数：9
相关论文
共 14 条
  • [1] Sun M., Qing X., Chen Z.N., 60-GHz end-fire fan-like antennas with wide beamwidth, IEEE Transactions on Antennas And Propagation, 61, 4, pp. 1616-1622, (2013)
  • [2] Baudha S., Vishwakarma D.K., Miniaturized dual broadband printed slot antenna with parasitic slot and patch, Microwave and Optical Technology Letters, 56, 10, pp. 2260-2265, (2014)
  • [3] Antoniades M.A., Eleftheriades G.V., A compact multiband monopole antenna with a defected ground plane, IEEE Antenna Wireless Propag, 7, pp. 652-655, (2008)
  • [4] Bhatnagar G.D., Saini J.S., Saxena V.K., Joshi L.M., Design of broadband circular patch microstrip antenna with diamond shape slot, Indian Journal of Radio and Space Physics, 40, 5, pp. 275-281, (2011)
  • [5] Kazim J., Bibi A., Rauf M., Tariq M., Owais, A compact planar dual band-notched monopole antenna for UWB application, Microwave and Optical Technology Letters, 56, 5, pp. 1095-1097, (2014)
  • [6] Baudha S., Vishwakarma D.K., A compact broadband printed monopole antenna with U-shaped slit rectangular parasitic patches, International Journal of Microwave and Wireless Technologies, 8, 8, pp. 1231-1235, (2015)
  • [7] Baudha S., Vishwakarma D.K., Bandwidth enhancement of a planar monopole microstrip patch antenna, International Journal of Microwave and Wireless Technologies, 8, 2, pp. 237-242, (2014)
  • [8] Wang Y.J., Lee C.K., Koh W.J., Single-patch and single-layer square microstrip antenna with 67.5% bandwidth, IEEE Microw Antenna Propag, 148, 6, pp. 418-422, (2001)
  • [9] Baudha S., Dinesh Kumar V., Corner truncated broadband patch antenna with circular slots, Microwave and Optical Technology Letters, 57, 4, pp. 845-849, (2015)
  • [10] Xu K., Zhu Z., Li H., Huangfu J., Li C., Ran L., A printed single-layer UWB monopole antenna with extended ground plane stubs, IEEE Antenna Wireless Propagation Letters, 12, pp. 237-241, (2013)
12