Heat Transfer during Boiling in Horizontal Layers of HFE-7100 on Smooth and Modified Surfaces

被引：1
作者：
Shvetsov, D. A. [1 ]
Pavlenko, A. N. [1 ]
Zhukov, V. I. [1 ,2 ]
机构：
[1] Russian Acad Sci, Kutateladze Inst Thermophys, Siberian Branch, Novosibirsk, Russia
[2] Novosibirsk State Tech Univ, Novosibirsk, Russia
来源：
JOURNAL OF ENGINEERING THERMOPHYSICS | 2024年 / 33卷 / 02期
基金：
俄罗斯科学基金会;
关键词：
POROUS COATINGS; LIQUID LAYER; POOL; EVAPORATION; HEIGHT; ENHANCEMENT; UNIFORM; FLUID; FLOW;
D O I：
10.1134/S1810232824020024
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Experimental data were obtained on heat transfer in horizontal layers of dielectric liquid HFE-7100 of various heights at atmospheric pressure. The heat transfer during boiling was studied on a smooth stainless steel surface and on a capillary-porous stainless steel coating manufactured by the SLM/SLS 3D printing technology. Comparison of the values of temperature pressure and critical heat flux on the smooth surface and on the capillary-porous coating has shown that in HFE-7100 layers with height below 6 mm, the heat transfer regime changes from pool boiling to boiling in thin layers of liquid. At a heat flux density of 100 kW/m(2), the temperature difference obtained on the capillary-porous coating was six times lower than that on the smooth surface.
引用
收藏
页码：250 / 268
页数：19
相关论文
共 67 条
  • [1] Aleshin A.A., 1980, High Temp, V18, P1098
  • [2] [Anonymous], 2002, 3MNovecEngineered Fluid HFE-7100 Physical Properties
  • [3] Development of a Technology for Creating Structured Capillary-Porous Coatings by Means of 3D Printing for Intensification of Heat Transfer during Boiling
    Bessmeltsev, V. P.
    Pavlenko, A. N.
    Zhukov, V. I.
    [J]. OPTOELECTRONICS INSTRUMENTATION AND DATA PROCESSING, 2019, 55 (06) : 554 - 563
  • [4] Borsenko Vasiliy Igorevich., 2001, High Temp, V39, P769
  • [5] Heat Transfer during Evaporation/Boiling of Horizontal Layers of Liquid at Low Pressure
    Brester, A. E.
    Shvetsov, D. A.
    Zhukov, V. I.
    Pavlenko, A. N.
    [J]. JOURNAL OF ENGINEERING THERMOPHYSICS, 2023, 32 (03) : 415 - 454
  • [6] Influence of liquid height on pool boiling heat transfer over open rectangular microchannels
    Dong, Yifang
    Yu, Yingying
    Ibrahim, Adnan
    Hu, Xuegong
    Hao, Yong
    [J]. APPLIED THERMAL ENGINEERING, 2023, 228
  • [7] Experimental determination of the role of increased surface area in pool boiling from nanostructured surfaces
    Doran, Brendon
    Zhang, Bin
    Walker, Abigail
    Pratik, K. C.
    Meng, W. J.
    Moore, Arden L.
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2020, 111
  • [8] Pool boiling performance of HFE-7100 on hierarchically structured surfaces
    dos Santos Filho, Erivelto
    Kiyomura, Igor Seicho
    de Andrade, Bruno Alves
    Cardoso, Elaine Maria
    [J]. CASE STUDIES IN THERMAL ENGINEERING, 2021, 28
  • [9] Enhanced boiling of HFE-7100 dielectric liquid on porous graphite
    El-Genk, MS
    Parker, JL
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2005, 46 (15-16) : 2455 - 2481
  • [10] Saturation boiling of HFE-7100 from a copper surface, simulating a microelectronic chip
    El-Genk, MS
    Bostanci, H
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (10) : 1841 - 1854
1234567