Design of laminated composite plate for optimum ballistic impact resistance: A finite element approach

被引：1

作者：

Jegadeesan K. ^{[1
]}

Datta S. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, SRM Institute of Science and Technology, Chennai, Kattankulathur

来源：

Materials Today: Proceedings | 2022年 / 68卷

关键词：

Ballistic impact; FEA; Laminated composite; Optimization;

D O I：

10.1016/j.matpr.2022.09.182

中图分类号：

学科分类号：

摘要：

The aim of this work was to design and analysis of the laminated composite plate for superior ballistic impact resistance. A laminated composite plate was modelled using ANSYS ACP (Ansys Composite Pre-Post). The explicit dynamic analysis was performed using finite element analysis to find the resistance of the composite laminates. The impact resistance of the laminated composite plate was simulated for various velocities of impact. The results of the design of experiments guided simulation were used for optimization to identify the optimum design points of the laminated plate. The ply orientation was considered as the design variable to perform the optimization. The comparison of the resistance of the different combinations of the plates was discussed. © 2022

引用

页码：2493 / 2497

页数：4

共 11 条

[1]

Lakshmana C., Rao V., Narayanamurthy K.R.Y.

[2]

Silva M.A.G., Cismasiu C., Chiorean C.G., Numerical simulation of ballistic impact on composite laminates, Int. J. Impact Eng., 31, 3, pp. 289-306, (2005)

[3]

Reddy P.R.S., Reddy T.S., Madhu V., Gogia A.K., Rao K.V., Behavior of E-glass composite laminates under ballistic impact, Mater. Des., 84, pp. 79-86, (2015)

[4]

Sikarwar R.S., Velmurugan R., Gupta N.K., Influence of fiber orientation and thickness on the response of glass/epoxy composites subjected to impact loading, Composites: Part B, 60, pp. 627-636, (2014)

[5]

Attalla E., Jawad B., Grate S., Fernandez V., Et al., (2019)

[6]

Sikarwar R.S., Velmurugan R., Ballistic Impact on Glass/Epoxy Composite LaminatesEnglish, DSJ, 64, 4, pp. 393-399, (2014)

[7]

Sikarwar R.S., Velmurugan R., Impact damage assessment of carbon fiber reinforced composite with different stacking sequence, J. Compos. Mater., 54, 2, pp. 193-203, (2020)

[8]

Nikbakt S., Kamarian S., Shakeri M., A review on optimization of composite structures Part I: Laminated Composites, Compos. Struct., 195, pp. 158-185, (2018)

[9]

Krishnan J., Chandrasekaran S., Krishnapillai S., Elsen R., Et al., (2020)

[10]

Satkar A.R., Mache A., Kulkarni A., Numerical investigation on perforation resistance of glass-carbon/epoxy hybrid composite laminate under ballistic impact, Mater. Today: Proc., 59, pp. 734-741, (2022)

← 1 2 →