Research on Dynamic Response of Pre-cracked Target Plate Subjected to Underwater Shock Wave

被引：0

作者：

Wei H. ^{[1
]}

Rong J. ^{[1
]}

Wei Z. ^{[1
]}

Xiang D. ^{[2
]}

He X. ^{[3
]}

Zhao Z. ^{[1
]}

机构：

[1] School of Aerospace Engineering, Beijing Institute of Technology, Beijing

[2] Beijing Institute of Aerospace System Engineering, Beijing

[3] Beijing Institute of Space Launch Technology, Beijing

来源：

Binggong Xuebao/Acta Armamentarii | 2019年 / 40卷 / 11期

关键词：

Finite element; Pre-crack target plate; Shock wave; Underwater explosion;

D O I：

10.3969/j.issn.1000-1093.2019.11.009

中图分类号：

学科分类号：

摘要：

The ship structure is inevitable to be scratched, grooved or damaged in the processes of manufacturing and use, which may reduce the damage-resistant capability of ship structure to some extend. An equivalent underwater explosion impact loading device was used for the impact experiments on the pre-cracked target plate, and the deformation of target plate was recorded by using high-speed camera. The dynamic response mechanism of the pre-cracked plate under underwater impact load was studied through experiment and ABAQUS simulations, and the "three-stage" dynamic response result was acquired. The results show that the dynamic responses of target plates which have pre-cracks with different shapes are different in the final failure stage. The target plates tend to release all the energy with fewest cracks. The crack parameters are studied. The displacement of pre-cracked target plate has approximately linear relationship with the loading impulse. With the increase in the crack depth or length, the residual impact resistance of target plate decreases. © 2019, Editorial Board of Acta Armamentarii. All right reserved.

引用

页码：2250 / 2258

页数：8

共 18 条

[1] Huang H., Transient bending of a large elastic plate by an incident spherical pressure wave, Journal of Applied Mechanics, 41, 3, pp. 772-776, (1974)
[2] Klaseboer E., Hung K.C., Wang C., Et al., Experimental and numerical investigation of the dynamics of an underwater explosion bubble near a resilient/rigid structure, Journal of Fluid Mechanics, 537, pp. 387-413, (2005)
[3] Liu Y.L., Zhang A.M., Tian Z.L., Et al., Numerical investigation on global responses of surface ship subjected to underwater explosion in waves, Ocean Engineering, 161, pp. 277-290, (2018)
[4] Latourte F., Gregoire D., Dan Z., Et al., Failure mechanisms in composite panels subjected to underwater impulsive loads, Journal of the Mechanics & Physics of Solids, 59, 8, pp. 1623-1646, (2011)
[5] Kim C.H., Shin Y.S., Numerical simulation of surface shield effects to waterblast wave, Ocean Engineering, 60, pp. 99-114, (2013)
[6] Xiang D.L., Rong J.L., He X., Et al., Development of an equivalent equipment on underwater explosion impulsive loading, Acta Armamentarii, 35, 6, pp. 857-863, (2014)
[7] Xiang D.L., Rong J.L., He X., Et al., Dynamics analysis of Al plate aubjected to underwater impulsive loads based on 3D DIC, Acta Armamentarii, 35, 8, pp. 1210-1217, (2014)
[8] He X., Rong J.L., Xiang D.L., Et al., The influence of flyer momentum on an aluminium plate's response to underwater shock loading, Journal of Mechanics, 35, 2, pp. 1-12, (2018)
[9] Xiang D.L., Rong J.L., He X., Experimental investigation of dynamic response and deformation of aluminium honeycomb sandwich panels subjected to underwater impulsive loads, Shock & Vibration, 6, pp. 117-119, (2015)
[10] Mu J.L., Zhu X., Zhang Z.H., Et al., Experimental study on deformation and rupture of stiffened plates subjected to underwater shock, Journal of Vibration and Shock, 27, 1, pp. 57-60, (2008)

← 1 2 →