Effect of warping restraint of beams to column joint on lateral buckling behavior for H-shaped beams with continuous braces under gradient flexural moment

被引：0

作者：

Kimura Y. ^{[1
]}

Miya M. ^{[2
]}

机构：

[1] Graduate School, Tohoku University

[2] Tokyo Electric Power Company Holdings, Inc.

来源：

J. Struct. Constr. Eng. | 2019年 / 766卷 / 1601-1611期

关键词：

Continuous Braces; Lateral Buckling; Required Rigidity; Stiffening Force; Warping Restraint;

D O I：

10.3130/aijs.84.1601

中图分类号：

学科分类号：

摘要：

When a steel moment frame is subjected to seismic force, H-shaped beams carry the gradient flexural moment. In Japanese steel moment resisting frames, H-shaped beams are rigidly connected to the box sectional columns, which have high warping restraint against lateral buckling deformation of beams. On the other hand, it is effective for continuous braces to prevent the lateral bucking. In this paper, the lateral buckling behavior for H-shaped beams with warping restraint and continuous braces under gradient flexural moment is clarified and elasto-plastic buckling stresses of beams and lateral stiffing force and rotational stiffing moment of continuous braces are evaluated. © 2019 Architectural Institute of Japan. All rights reserved.

引用

页码：1601 / 1611

页数：10

共 24 条

[21]

Idota H., Kato Y., Ono T., Lateral bracing spacing and strength of H-shaped steel beams under cyclic loading, Journal of Structural and Construction Engineering (Transactions of AIJ), 78, 693, pp. 1989-1998, (2013)

[22]

AIJ: Japanese Architectural Standard Specification 6, (2018)

[23]

Suzuki T., Lateral bracing forces on beams and columns, Journal of Structural and Construction Engineering, Transactions of the Architectural Institute of Japan, 41, (1966)

[24]

Ono T., Ishida T., Shimono K., A study on bracing for steel column and beam considering limit state, Journal of Structural and Construction Engineering (Transactions of AIJ), 69, pp. 117-125, (1995)

← 1 2 3 →