共 41 条
- [1] Hong Y, Lei Z, Sun C, Et al., Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels, International Journal of Fatigue, 58, pp. 144-151, (2014)
- [2] Zhao A, Xie J, Sun C, Et al., Prediction of threshold value for FGA formation, Materials Science & Engineering A, 528, pp. 6872-6877, (2011)
- [3] Hong Y, Liu X, Lei Z, Et al., The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels, International Journal of Fatigue, 89, pp. 108-118, (2016)
- [4] Hong Y, Zhao A, Qian G, Et al., Fatigue strength and crack initiation mechanism of very-high-cycle fatigue for low alloy steels, Metallurgical and Materials Transactions A, 43, pp. 2753-2762, (2012)
- [5] Sakai T, Takeda M, Shiozawa K, Et al., Experimental reconfirmation of characteristic S-N property for high carbon chromium bearing steel in wide life region in rotating bending, Journal of the Society of Materials Science, Japan, 49, 7, pp. 779-785, (2000)
- [6] Murakami Yu, Nomoto T, Ueda T, Et al., On the mechanism of fatigue failure in the superlong life regime (N > 10<sup>7</sup> cycles), Part I: influence of hydrogen trapped by inclusions, Fatigue & Fracture of Engineering Materials & Structures, 23, pp. 893-902, (2000)
- [7] Shiozawa K, Lu L, Ishihara S., S–N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon –chromium bearing steel, Fatigue & Fracture of Engineering Materials & Structures, 24, pp. 781-790, (2001)
- [8] Pan X, Hong Y., High-cycle and very-high-cycle fatigue behavior of a titanium alloy with equiaxed microstructure under different mean stresses, Fatigue & Fracture of Engineering Materials & Structures, 42, pp. 1950-1964, (2019)
- [9] Liu X, Sun C, Hong Y., Effects of stress ratio on high-cycle and very-high-cycle fatigue behavior of a Ti–6Al–4V alloy, Materials Science & Engineering A, 622, pp. 228-235, (2015)
- [10] Su H, Liu X, Sun C, Et al., Nanograin layer formation at crack initiation region for very-high-cycle fatigue of a Ti-6Al-4V alloy, Fatigue & Fracture of Engineering Materials & Structures, 40, pp. 979-993, (2017)