Electrical discharge turning by assistance of external magnetic field, part II: Study of surface integrity

被引：0

作者：

Azhiri R.B. ^{[1
]}

Jadidi A. ^{[2
]}

Teimouri R. ^{[3
]}

机构：

[1] Department of Mechanical Engineering, University of Texas at Dallas, Richardson, TX

[2] Department of Manufacturing Engineering, University of Tabriz, Tabriz

[3] Department of Mechanical Engineering, University of Kashan, Kashan

来源：

International Journal of Lightweight Materials and Manufacture | 2020年 / 3卷 / 03期

关键词：

Electrical discharge turning; Magnetic flux density; Optimization; Surface integrity;

D O I：

10.1016/j.ijlmm.2020.03.002

中图分类号：

学科分类号：

摘要：

Surface integrity as one of the main outcomes of hybrid machining process has dominant effect on the life time of engineering material. In this work, surface integrity of the AISI D2 steel grooves produced by electrical discharge turning (EDT) process was studied through experimental investigation. Here, for first time magnetic force has been integrated with EDT process to find how it influences the surface properties such as surface roughness, thickness of recast layer as well as surface hardness. Series of experiments based on Taguchi experimental design have been carried out taken into account magnetic flux density, discharge current, pulse on time and workpiece rotational speed as main inputs. Statistical optimization using grey relational analysis (GRA) was performed to understand how the hybrid machining parameter should be selected regarding minimum surface roughness and recast layer thickness as well as maximum hardness. Results indicated that magnetic flux density as well as work rotational speed have great impact in determining the surface integrity of machined grooves. Also, it is found that 0.4 T magnetic flux density, 5 A discharge current, 1000 μs pulse on time and 250 RPM work rotational speed is an optimal parameter setting that leads to maximization of hardness as well as minimization of surface roughness and recast layer thickness. © 2020 The Authors

引用

页码：305 / 315

页数：10

共 22 条

[1]

Gohil V., Puri Y.M., Turning by electrical discharge machining: a review, Proc. IME B J. Eng. Manuf., 231, 2, pp. 195-208, (2017)

[2]

Vignesh M., Ramanujam R., Kuppan P., A comprehensive review on wire electrical discharge based hybrid turning (WEDHT), Mater. Today Proc., 5, 5, pp. 12273-12284, (2018)

[3]

Garg R.K., Singh K.K., Sachdeva A., Sharma V.S., Ojha K., Singh S., Review of research work in sinking EDM and WEDM on metal matrix composite materials, Int. J. Adv. Manuf. Technol., 50, 5, pp. 611-624, (2010)

[4]

Uyyala S.B., An hybrid approach for multi-response optimization of rotary electrical discharge machining of nickel super alloy, Mater. Today Proc., 23, pp. 626-631, (2020)

[5]

Hsue A.W., Hab T.J., Lin T.M., Pulse efficiency and gap status of rotary ultrasonic assisted electrical discharge machining and EDM milling, Procedia CIRP, 68, pp. 783-788, (2018)

[6]

Cheong H.G., Kim Y.S., Chu C.N., Effect of reverse current on tool wear in micro-electrical discharge milling, Precis. Eng., 55, pp. 484-490, (2019)

[7]

Gohil V., Puri Y.M., Optimization of electrical discharge turning process using Taguchi-Grey relational approach, Procedia CIRP, 68, pp. 70-75, (2018)

[8]

Uhlmann E., Piltz S., Jerzembeck S., Micro-machining of cylindrical parts by electrical discharge grinding, J. Mater. Process. Technol., 160, 1, pp. 15-23, (2005)

[9]

Matoorian P., Sulaiman S., Ahmad M.M., An experimental study for optimization of electrical discharge turning (EDT) process, J. Mater. Process. Technol., 204, 1, pp. 350-356, (2008)

[10]

Mohammadi A., Tehrani A.F., Emanian E., Karimi D., Statistical analysis of wire electrical discharge turning on material removal rate, J. Mater. Process. Technol., 205, 1, pp. 283-289, (2008)

← 1 2 3 →