Study on Practical Application for In-process Detection Method of Blowholes

被引：0

作者：

Kasano K. ^{[1
]}

Ogino Y. ^{[2
]}

Sano T. ^{[2
]}

Asai S. ^{[3
]}

机构：

[1] Sumitomo Heavy Industries, LTD

[2] Graduate School of Engineering, Osaka Unive

[3] Joining and Welding Research Institute, Osaka Univ

来源：

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 2021年 / 39卷 / 04期

关键词：

Arc phenomena; Blowholes; Image sensing; In-process welding quality management; Welding defects;

D O I：

10.2207/QJJWS.39.334

中图分类号：

学科分类号：

摘要：

For the development of in-process Blow Hole(BH) detection and prediction technology, welding system with infrared camera and welding robot was integrated and the authors verified the detection of welding phenomena directly associated with the occurrence of BH. In addition, an image analysis index for welding defect detection and prediction was considered. It was clarified that it is possible to observe the bubbling phenomena just under the arc due to the blow hole generation by the welding system. In addition, it was considered possible to detect and predict the occurrence of BH with high accuracy by analyzing the observation frequency of the bubble generation phenomenon directly under the arc with an appropriate index. © 2021 Japan Welding Society. All rights reserved.

引用

页码：334 / 346

页数：12

共 24 条

[21]

OGINO Yosuke, FUKUMOTO Satoshi, ASAI Satoru, KASANO Kazuki, Development of monitoring method of welding phenomena based on arc emission property 2nd report Discussion by spectroscopy and numerical simulation, Preprints of the National Meeting of The Japan Welding Society, (2020)

[22]

YUAN Yimin, Development of Hybrid Tandem GMAW Process, Journal of The Japan Welding Society, 8 6, pp. 90-94

[23]

IZUTANI Shun, YAMAZAKI Kei, SUZUKI Reiichi, UEDA Yuji, NAKAMURA Kazuki, UEZONO Toshiro, Blowhole Generation Phenomenon and Quality Improvement in GMAW of Galvanized Steel Sheet, International Journal of Automation Technology, 7, 1, (2013)

[24]

KONDO Taiga, YAMAMOTO Motomichi, SHINOZAKI Kenji, OTANI Naoyuki, KUSABA Takuya, KIJI Noboru, Defect Formation during Fillet Welding on Primer Coated Steel Pipe, Preprints of the NationalMeeting of The Japan Welding Society, 103, (2018)

← 1 2 3 →