Study on Practical Application for In-process Detection Method of Blowholes

被引：0

作者：

Kasano K. ^{[1
]}

Ogino Y. ^{[2
]}

Sano T. ^{[2
]}

Asai S. ^{[3
]}

机构：

[1] Sumitomo Heavy Industries, LTD

[2] Graduate School of Engineering, Osaka Unive

[3] Joining and Welding Research Institute, Osaka Univ

来源：

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 2021年 / 39卷 / 04期

关键词：

Arc phenomena; Blowholes; Image sensing; In-process welding quality management; Welding defects;

D O I：

10.2207/QJJWS.39.334

中图分类号：

学科分类号：

摘要：

For the development of in-process Blow Hole(BH) detection and prediction technology, welding system with infrared camera and welding robot was integrated and the authors verified the detection of welding phenomena directly associated with the occurrence of BH. In addition, an image analysis index for welding defect detection and prediction was considered. It was clarified that it is possible to observe the bubbling phenomena just under the arc due to the blow hole generation by the welding system. In addition, it was considered possible to detect and predict the occurrence of BH with high accuracy by analyzing the observation frequency of the bubble generation phenomenon directly under the arc with an appropriate index. © 2021 Japan Welding Society. All rights reserved.

引用

页码：334 / 346

页数：12

共 24 条

[11]

Shin Seungmin, Kim Min Seok, Rhee Sehun, Prediction of weld porosity (pit) in gas metal arc welds, The International Journal of Advanced Manufacturing Technology, 104, (2019)

[12]

Na LV, Gu Fang, Yan-ling Xu, Hui Zhao, Shan-ben Chen, Zou Ju-jia, Real-time monitoring of welding path in pulse metal-inert gas robotic welding using a dual-microphone array, The International Journal of Advanced Manufacturing Technology, 90, (2017)

[13]

Yusof M.F.M., Kamaruzaman M.A., Ishak M., Ghazali M.F., Porosity detection by analyzing arc sound signal acquired during the welding process of gas pipeline steel, The International Journal of Advanced Manufacturing Technology, 89, (2017)

[14]

Kaihara Shoichiro, Kouketsu Masaishi, Saitoh Tatsuo, Murayama Takehiro, Irisawa Tosio, Sakai Keiichi, Development of In-Process Assurance Welding System(No.1), Preprints of the National Meeting of The Japan Welding Society, 49, (1991)

[15]

Kaihara Shoichiro, Kouketsu Masaishi, Saitoh Tatsuo, Murayama Takehiro, Arakawa Takehiro, Sakai Keiichi, Development of In-Process Assurance Welding System -(No.2) Application for semiautomatic TIG and MIG weldings, Preprints of the National Meeting of The Japan Welding Society, 50, (1992)

[16]

Kaihara Shoichiro, Kouketsu Masaishi, Nakamura Terumi, Arakawa Takahiro, Development of In-Process Assurance Welding System - (No.3) Application for semi-automatic TIG-, Preprints of the National Meeting of The Japan Welding Society, 51, (1992)

[17]

Tejima Akio, Real time diagnostic system of weld quality, Journal of The Japan Welding Society, 69, 4, (2000)

[18]

KASANO Kazuki, OGINO Yosuke, FUKUMOTO Satoshi, ASAI Satoru, Tomokazu SANO, Observation of welding phenomena with blowholes for detection of welding defects -Development of in-process welding monitoring technology with image sensing technology, Quarterly Journal of The Japan Welding Society, 38, 3, (2020)

[19]

KASANO Kazuki, OGINO Yosuke, Satoru ASAI, Fundamental Study on On-line Image Sensing Technology of Arc Welding - Development of In-process Quality Control Technology of Arc Welding, Quarterly Journal of The Japan Welding Society, 37, 3, (2019)

[20]

KASANO Kazuki, OGINO Yosuke, FUKUMOTO Satoshi, ASAI Satoru, Study on welding phenomena observation method based on arc and moltenpool light emission characteristics in visible and infrared wavelength region -Development of image sensing technology for in-process welding monitoring technology, Quarterly Journal of The Japan Welding Society, 38, 2, (2020)

← 1 2 3 →