Study on Residual Stress in Friction Stir and Tungsten Inert Gas Welded 2219 Aluminum Alloy Sheets Using Neutron Diffraction

被引：0

作者：

Chen X. ^{[1
]}

Liu X. ^{[1
]}

Wu Y. ^{[2
]}

Nie L. ^{[2
]}

Li M. ^{[1
]}

Sun K. ^{[1
]}

Chen D. ^{[1
]}

Liu Y. ^{[1
]}

机构：

[1] China Institute of Atomic Energy, Beijing

[2] Central South University, Changsha

来源：

Yuanzineng Kexue Jishu/Atomic Energy Science and Technology | 2019年 / 53卷 / 11期

关键词：

2219 aluminum alloy; Friction stir welding; Neutron diffraction; Residual stress; Tungsten inert gas welding;

D O I：

10.7538/yzk.2019.youxian.0182

中图分类号：

学科分类号：

摘要：

The 3D residual stresses in the friction stir and tungsten inert gas welded 2219 aluminum alloy sheets were characterized using neutron diffraction. The results show that residual stress is larger in longitudinal direction after welding process. The magnitude of the residual stress in friction stir welded sheet is generally smaller than that in the tungsten inert gas welded sheet. The maximum tensile stress of friction stir welded sheet is 101 MPa, which is smaller than that of tungsten inert gas welded stress of 174 MPa. Friction stir welded sheet tensile peaks show at sides of the tool edge, and the tensile residual stress on the advancing side is higher than that on the retreating side. Tungsten inert gas welded stress residual stress peaks show at the sides of welding zone. Residual stress distributions obtained by neutron diffraction will be used to optimize the welding process and predict the lifespan of 2219 aluminum alloy. © 2019, Editorial Board of Atomic Energy Science and Technology. All right reserved.

引用

页码：2289 / 2294

页数：5

共 13 条

[1] Tarng Y.S., Tsai H.L., Yeh S.S., Modeling, optimization and classification of weld quality in tungsten inert gas welding, International Journal of Machine Tools and Manufacture, 39, 9, pp. 1427-1431, (1999)
[2] Song X., Zhu Z., Chen Y., Research status and prospect of friction stir welding, Hot Working Technology, 42, 13, pp. 5-7, (2013)
[3] Withers P.J., Bhadeshia H.K.D.H., Residual stress, part 1: Measurements, Materials Science & Technology, 17, 4, pp. 355-365, (2001)
[4] Li T., Shi Q., Li H., Et al., Residual stress distribution of aluminum friction stir welding sample, Transaction of the China Welding Institution, 28, 6, pp. 105-108, (2007)
[5] Staron P., Kocak M., Williams M., Et al., Residual stresss in friction stir welded Al sheets, Physical B: Condensed Matters, 350, 1-3, pp. 491-493, (2004)
[6] Li Q., Song J., Peng J., Et al., Residual stress distribution of tungsten inert welding sample, Welding and Joining, 1, pp. 54-57, (2016)
[7] Woo W.C., Em V., Mikula P., Et al., Neutron diffraction measurements of residual stresses in a 50 mm thick weld, Material Science and Engineering, A528, pp. 4120-4124, (2011)
[8] Steuwer A., Peel M.J., Withers P.J., Dissimilar friction stir welds in AA5083-AA6082: The effect of process parameters on residual stress, Materials Science and Engineering A, 441, pp. 187-196, (2006)
[9] Allen A.J., Hutching M.T., Windsor C.G., Et al., Neutron diffraction methods for the study of residual stress fields, Advanced Physics, 34, 4, pp. 445-473, (1985)
[10] Chai P., Luan G., Guo D., Et al., Technology of friction stir welding residual stress distribution and controlling, Transaction of the China Welding Institution, 26, 11, (2005)

← 1 2 →