STRENGTH DEVELOPMENT OF 300 N/MM2 CLASS ULTRA-HIGH STRENGTH GROUT DURING HEAT CONTROLLED CURING WITH ELEVATED TEMPERATURES

被引：0
作者：
Honma D. [1 ,2 ]
Kojima M. [2 ]
Nishiwaki T. [3 ,4 ]
Mihashi H. [4 ]
机构：
[1] Construction Material Engineering Group, Construction Technology Research Department, R & D Institute, Takenaka Co.
[2] Construction Technology Research Department, R & D Institute, Takenaka Co.
[3] Dept. of Architecture and Building Science, Graduate School of Engineering, Tohoku Univ.
来源：
Journal of Structural and Construction Engineering | 2023年 / 88卷 / 810期
关键词：
Compressivestrength; Effectiveage; Poresizedistribution; Ultrahighstrengthconcrete; Ultrahighstrengthgrout; XRD;
D O I：
10.3130/aijs.88.1230
中图分类号：
O6 [化学]; TQ03 [化学反应过程]; TQ02 [化工过程（物理过程及物理化学过程）];
学科分类号：
0703 ; 081701 ; 081704 ;
摘要：
The strength development of 300N/mm2 class ultra-high strength grout by heat-controlled curing was investigated. The strength development at 80-180 ℃ becomes higher than that at a constant temperature of 5-35 ℃, and can be expressed by an effective age based on the same manner. This is because the reactions of C2S, C3A, and C4AF are promoted, and the capillary pores are reduced by heat-controlled curing. Furthermore, it was clarified that heat-controlled curing with a heatingwire system and/or surfaceheatingelements achievedthe samestrength level as that byheat-controlledcuring under sealedconditions due tosimilarwater content. © 2023 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码：1230 / 1239
页数：9
相关论文
共 23 条
  • [1] Homma Daisuke, Kojima Masaro, Ishigami Tetsuya, Obayashi Masaru, Manufacture of Ultra High strength Precast Concrete Columns and Joint Method With Fc 300N/mm<sup>2</sup>, concrete journal, 57, 12, pp. 930-935, (2019)
  • [2] Homma Daisuke, Tanabe Yusuke, Kojima Masaro, Manufacturing Technology of Fc 300N/mm<sup>2</sup> Ultra High strength Precast Concrete and grout and Structural Characteristics as a Slender Columns, concrete journal, 60, 6, pp. 517-524, (2022)
  • [3] Sasa Yoshinobu, Hata Shinji, Hara Yasutoshi, Honma Daisuke, Kojima Masaro, Development of mortar grouting for Fc 300N/mm<sup>2</sup> precast concrete members Part 2. Fatigue test of mechanical joint with the developed mortar, pp. 437-438, (2019)
  • [4] Kojima Masaro, Matsushita Tetsuro, Tsuji Daijiro, Koyama Tomoyuki, Experimental study of materials, mix proportion And curing conditions to achieve 300 N/mm<sup>2</sup> high strength concrete, AIJ J. Technol. Des, 26, 64, pp. 833-838, (2020)
  • [5] Hara Yasutoshi, Hata Shinji, Sasa Yoshinobu, Honma Daisuke, Kojima Masaro, Development of mortar grouting for Fc 300N/mm<sup>2</sup> precast concrete members Part 1. Basic characteristics of super-high-strength mortar grout, pp. 435-436, (2019)
  • [6] Homma Daisuke, Kojima Masaro, Development of mortar grouting for Fc 300N/mm<sup>2</sup> precast concrete members Part 5 structure strength and long-term curing strength, pp. 265-266, (2021)
  • [7] Hata Shinji, Hara Yasutoshi, Sasa Yoshinobu, Honma Daisuke, Kojima Masaro, Development of mortar grouting for Fc 300N/mm<sup>2</sup> precast concrete members Part 3. Heat curing method for joint area, pp. 439-440, (2019)
  • [8] Homma Daisuke, Kojima Masaro, Nishiwaki Tomoya, Mihashi Hirozo, Development of heating method to cure grout for joints of Compressive strength 300N/mm<sup>2</sup> class precast members, AIJ J. Technol. Des, 29, 71, pp. 19-22, (2023)
  • [9] Recommendation for Practice of High-Strength Concrete, (2013)
  • [10] Kojima Masao, Homma Daisuke, Koyama Tomoyuki, study on manufacturing technology of high strength concrete precast members with design standard strength of 300 N/mm<sup>2</sup>, AIJ J. Technol. Des, 27, 65, pp. 24-29, (2021)
123