Structure and Properties of Fluorinated Acrylate Polymer Microspheres Filled Epoxy Resin Coatings

被引:0
|
作者
Gao K. [1 ]
Xiang Y. [1 ]
Fang J. [1 ]
Ren Q. [1 ]
Wang C. [1 ]
Li J. [1 ]
机构
[1] National Experimental Demonstration Center for Materials Science and Engineering, Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Changzhou University, Changzhou
关键词
corrosion resistance; electrochemical impedance spectroscopy; epoxy coating; fluoropolymer microspheres; UV aging resistance;
D O I
10.16865/j.cnki.1000-7555.2023.0164
中图分类号
学科分类号
摘要
Poly(dodecafluoroheptyl methacrylate) and (dodecafluoroheptyl methacrylate- glycidyl methacrylate) microspheres were prepared by dispersion polymerization and filled into epoxy resin to prepare polymer microspheres/ epoxy resin composite coatings. FT- IR was used to characterize the surface chemical composition of copolymerized microspheres. The microstructure and particle size distribution of microspheres were characterized by SEM and laser particle size analyzer. Electrochemical impedance spectroscopy (EIS) was used to test the corrosion resistance of the composite coatings. After 60 d of testing, the impedance value of the coating filled with fluoropolymer microspheres remains at 109 Ω · cm2, indicating that the polymer microspheres can effectively prevent the penetration of corrosive media and achieve long- term corrosion resistance of coatings. The results of water absorption test show that the water absorption of the film can be reduced from 1.75% to 0.7% by filling the microspheres. In addition, UV aging test proves that the addition of fluoropolymer can improve the UV aging resistance of the coating films. © 2023 Chengdu University of Science and Technology. All rights reserved.
引用
收藏
页码:66 / 73
页数:7
相关论文
共 14 条
  • [1] Pan W, Li Y, Xin J, Et al., Preparation of a low water absorption polysulfide rubber modified epoxy resin heavy corrosion matrix, Surface Technology, 51, 4, pp. 227-235, (2022)
  • [2] Li C, Li Y, Wang X, Et al., Synthesis of hydrophobic fluorosubstituted polyaniline filler for the long- term anti- corrosion performance enhancement of epoxy coatings, Corrosion Science, 178, (2021)
  • [3] Fei G Q, Wang J, Wang H H, Et al., Preparation and properties of water- borne polyurethane acrylate/graphene oxide anticorrosive coatings, Polymeric Materials Science & Engineering, 32, 4, pp. 173-178, (2016)
  • [4] Yao W, Li Y, Huang X., Fluorinated poly(meth)acrylate: synthesis and properties, Polymer, 55, pp. 6197-6211, (2014)
  • [5] Ge P F, Ren Q, Bian J H, Et al., Preparation and properties of fluorinated block acrylate polymer/epoxy self-laminating coatings, Paint & Coatings Industry, 48, 4, pp. 1-8, (2018)
  • [6] Wang T Y, Fan H J, Chen Y, Et al., Poly(methyl methacrylate) microspheres with controllable size were prepared by dispersion polymerization, Polymeric Materials Science & Engineering, 35, 2, pp. 41-46, (2019)
  • [7] Wang N, Zhang Y N, Luan H H, Et al., Preparation and corrosion resistance of water- based epoxy coating filled with organic microspheres, Chinese Journal of Materials Research, 31, 1, pp. 1-8, (2017)
  • [8] Dong Y, Geng C, Wang X, Et al., Porous polystyrene nanoparticles as nanocontainers of inhibitors for corrosion protection of low- alloy steel, Pigment & Resin Technology, 49, pp. 305-313, (2020)
  • [9] Liu Q, Wang L, Xiao A, Et al., Controllable preparation of monodisperse polystyrene microspheres with different sizes by dispersion polymerization, Macromolecular Symposia, 261, pp. 113-120, (2008)
  • [10] Ramezanzadeh B, Niroumandrad S, Ahmadi A, Et al., Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide, Corrosion Science, 103, pp. 283-304, (2016)